Sony Ipela PCS-G60, Руководство по эксплуатации

Страница: 53 / 253

53
Using the Menus
Cha
p
te
r 1:
Ins
ta
lla
ti
on
an
d Prepa
ra
ti
on
When “Internet Protocol” is set to “IPv6” or “IPv4/IPv6” in the Administrator setup
menu, you can enter colons (:).
When “IPv4/IPv6” is specified, only colons can be entered with the
b button. When
“IPv4/IPv6” is specified and you are calling using IPv4, press the DOT button twice to
enter a dot.
To delete a character
Press the BACK SPACE button. The last entered character is deleted.
To delete all the characters entered
Press the F3 button.
This section explains how to enter the letters or numbers in the text box in the
menu using the on-screen keyboard displayed on the monitor screen.
When “Display On-Screen Keyboard” is set to “On” in the Menu Screens page
of the General setup menu (page 77), the on-screen keyboard automatically
appears on the screen if character input is required in the menu.
You can also use the buttons on the Remote Commander even when the on-screen
keyboard is displayed on the screen.
To enter letters or numbers
1
Use the
V
,
v
,
B
or
b
button on the Remote Commander to select “Num”
or “Alpha” on the on-screen keyboard, then press the ENTER button.
Select “Num” to enter numbers, and “Alpha” to enter alphabetic letters.
2
Use the V , v , B or b button on the Remote Commander to select the button
on the on-screen keyboard on which the desired character is indicated, then
press the ENTER button.
When you select a number, the selected number is entered.
Note
Entering Characters Using the On-Screen Keyboard
Note
Num ABC DEF
MNO
1
GHI JKL
PQRS TUV WXYZ Symbol
0 Dot
Space
End Cancel
Alpha
Back
Space