Sony Ipela PCS-G50, Руководство по эксплуатации, Страница: 77 / 259

77
Registering a Remote Party – Phone Book
3
Select “Create Private Phone Book”.
An empty folder and file for a Private
Phone Book are created in the “Memory
Stick”.
4
Register a new remote party.
The procedure is the same as that for
registering in the Phone Book. Proceed
with steps 2 to 7 in “Registering a New
Remote Party” on page 72.
The procedures for how to change the
contents of the Private Phone Book, how to
delete the registered remote party, or how to
copy the setting of the Private Phone Book
are the same as those for the Phone Book.
Open the Private Phone Book menu and
proceed with the steps described on page 75.
To copy all the contents of the
Phone Book to the Private Phone
Book
Insert the “Memory Stick” in which you
want to store the Private Phone Book into
the Memory Stick slot on the
Communication Terminal, then select
“Copy to Private Phone Book” from the
“Private Phone Book” of the Administrator
Setup menu. All the data registered in the
Phone Book are copied to the inserted
“Memory Stick”.
To delete the Private Phone Book
from the “Memory Stick”
Insert the “Memory Stick” from which you
want to delete the registered Private Phone
Book into the Memory Stick slot on the
Communication Terminal, then select
“Delete Private Phone Book” from the
“Private Phone Book” of the Administrator
Setup menu. All the data are deleted from
the inserted “Memory Stick”.
To dial a specified list in a Private
Phone Book automatically
If you set “Auto Dial” in the “Private Phone
Book” of the Administrator Setup menu to
“On”, you can automatically dial one of the
lists registered in the Private Phone Book
simply by inserting into the Memory Stick
slot the “Memory Stick” in which the Private
Phone Book is registered.
1
Open the Private Phone Book.
2
Use the V , v , B or b button on the
Remote Commander to select the
remote party to dial automatically,
then press the PUSH ENTER button.
3
Press the
V
or
v
button on the Remote
Commander to select “Edit”, then
press the PUSH ENTER button.
The List Edit menu appears.
4
Use the V , v , B or b button on the
Remote Commander to select “Auto
Dial”, then press the PUSH ENTER
button.
5
Use the
V
,
v
,
B
or
b
button on the
Remote Commander to select “Save”,
then press the PUSH ENTER button.
The setting is registered and “AUTO”
appears on the registered list.