Sony Ipela PCS-G50, Руководство по эксплуатации, Страница: 157 / 259

157
Displaying the Picture on a Projector or Monitor
Displaying the Picture on a Projector or
Monitor
When you connect the Data Solution Box to the Communication Terminal,
connections with external monitors, etc. using the following four outputs are
available. The connections allow output of the picture to one, two or three
monitors selected from among four.
Select the output with “Connection” under “Monitor Out” in the Video Setup
menu.
VIDEO 1: Outputs the signal to the monitor (monitor A in the illustration
above) connected to the VIDEO OUT MONITOR 1 connector of the
Communication Terminal.
RGB OUT: Outputs the signal to the monitor (monitor C in the illustration
above) connected to the RGB OUT connector of the Communication
Terminal.
RGB OUT (DSB): Outputs the signal to a monitor (monitor D in the
illustration above) connected to the RGB OUT connector of the Data
Solution Box.
Outputting the Signal to One Monitor
to VIDEO OUT
MONITOR 2
Monitor A
to RGB OUT
to VIDEO OUT
MONITOR 1
Monitor D
Monitor B
Monitor C
to RGB OUT on the
PCSA-DSB1S