Sony Ipela PCS-G50, Руководство по эксплуатации, Страница: 144 / 259

144
Conducting a Data Conference Using NetMeeting – T.120 Data Conference
Conducting a Data Conference Using
NetMeeting – T.120 Data Conference
Connecting the Communication Terminal to the computer with NetMeeting*
installed enables conduct of a data conference in compliance with the T.120
standard of the ITU-T Recommendation via the PCS-G50/G50P Video
Communication System only when it is connected over ISDN.
*
NetMeeting is a registered trademark of Microsoft Corporation.
• When the Communication Terminal is used for a multipoint videoconference, the
T.120 data conference is not available.
• When the PCS-G50/G50P Video Communication System is connected with a
videoconferencing system at the remote party via LAN, conduct the T.120 data
conference using a computer instead of the PCS-PG50/PG50P.
To connect a computer
To connect a computer to the connector on the Communication
Terminal
Use a commercially available UTP cross cable (category 5) to connect the
LAN connector on the computer with the 100BASE-TX/10BASE-T connector
on the Communication Terminal.
Notes
to 100BASE-TX/
10BASE-T
Computer
UTP cross cable
(not supplied)
to LAN
connector
PCSA-B768S
ISDN Unit
UTP cross cable
(not supplied)
to LAN
connector
to 100BASE-TX/
10BASE-T
Computer