Sony Ipela PCS-G50, Руководство по эксплуатации, Страница: 116 / 259

116
“Memory Stick” Media
“Memory Stick”
Media
Notes on using “Memory Stick”
media
• When you set the “Memory Stick” erasure
prevention switch to “LOCK”, data cannot
be recorded, edited, or deleted.
The position and shape of the write-protect
switch may differ between the various types
of “Memory Stick”.
• Do not remove the “Memory Stick” while
it is reading or writing data.
• Data may be damaged if:
–The “Memory Stick” is removed or the
unit is turned off while reading or
writing.
–You use the “Memory Stick” in a
location subject to the effects of static
electricity or electric noise.
• We recommend that you back up
important data recorded on the “Memory
Stick”.
• Do not affix anything other than the
supplied label to the “Memory Stick” label
area.
• Affix the label so that it does not stick out
beyond the label area.
• When storing or carrying a “Memory
Stick”, keep it in its original case.
• Do not touch the terminal of the “Memory
Stick” with anything, including your
fingers or metallic objects.
• Do not strike, bend, or drop the “Memory
Stick”.
• Do not disassemble or modify the
“Memory Stick”.
• Do not allow the “Memory Stick” to get
wet.
• Do not use or store the “Memory Stick” in
locations subject to:
–Extreme heat, such as in a closed car
parked in the sun.
–Direct sunlight.
–Humidity or corrosive substances.
About data
• When you set the “Memory Stick” erasure
prevention switch to “LOCK”, data such
as images and mails cannot be recorded,
edited, or deleted. Be sure to unlock the
switch before transferring or copying data
on the unit to the “Memory Stick”, or
erasing data on the “Memory Stick”.
• We recommend that you make a backup
copy of important data on another
“Memory Stick” or on a hard disk using a
computer.
Notes on using “Memory Stick
Duo”
• Use a pointed object, such as a ballpoint
pen, to move the “Memory Stick Duo”
write-protect switch.
• Do not write forcefully on the “Memory
Stick Duo” memo area.
Notes on using the Memory Select
function
• You cannot use multiple memory blocks
simultaneously or continuously.
• Never operate the Memory Select switch
when the “Memory Stick” is inserted in
the slot of the unit, as it may cause
damage. Sony Corporation assumes no
liability for failure resulting from such
operation.
• Make sure that the Memory Select switch
is properly positioned to the side. When
the switch is not positioned properly, the
unit may be damaged or malfunction.
Terminal
Erasure
prevention
switch
Label area
Terminal
Write-protect
switch
Memo area