Sony IPELA NSR Series, Руководство по установке, Страница: 30 / 340

Connection Examples
30
Notes
• Do not connect the monitors to HDMI monitor
connectors 1 and 2.
• Do not connect a monitor to analog RGB monitor
connector 1 on the front of the unit while the unit is on.
Example 3) When connecting an HDMI monitor
and analog RGB monitor (HDMI monitor used
for operations)
: Audio output locations.
Note
Use HDMI monitor connector 1 and analog RGB
monitor connector 2 for connections.
Example 4) When connecting an HDMI monitor
and analog RGB monitor (analog RGB monitor
used for operations)
: Audio output locations.
Note
Use analog RGB monitor connector 1 and HDMI
monitor connector 2 for connections.
NSRE-S200 Connection Example
You can connect up to seven optional NSRE-S200 units
to the NSR-1200/1100/1050H in the following tree
configurations.
Note
The mini-SAS cable used for connection is supplied
with the NSRE-S200. Always use the supplied cable.
We recommend connecting NSRE-S200 expansions in
the following order.
The following is the list displayed when units are
connected in Position #1, #3, and #6. Be aware that the
Volume # is displayed in the order in which the
partitions were configured.
POWER 1 2 3 NETWORK 1 2 3 4 HDD 1 2 3 4 ERROR STATUS REC
Audio amplifier
(connect to
audio output
connectors
(L/R))
POWER 1 2 3 NETWORK 1 2 3 4 HDD 1 2 3 4 ERROR STATUS REC
Audio amplifier
2
4 5 6 7
3
1
NSRE-S200
NSR-1000 series
Mini-SAS cable
Mini-SAS output connector
Mini-SAS input connector
NSRE-S200 NSRE-S200
NSRE-S200