Sony Ipela NSR-S10, Руководство пользователя

Страница: 53 / 67

53
Relay Setting
Cha
p
te
r 4
De
tai
led Des
c
ript
ion
s
of
Set
tings
and
Wi
ndo
ws
A
Sensors
Select the sensor that you want to set from the drop-down
list.
The drop-down list shows the I/O devices connected to the
NSR system that were detected automatically.
Name
Enter the name of the sensor input.
Use only alphanumeric characters and symbols
(excluding \ / : * ? " < > |).
B
Test
Click [Test] to confirm the sensor input status.
Red indicates “high,” and green indicates “low.”
Click [Stop] to stop testing.
Relay Setting
You can configure settings related to this unit’s relay
outputs.
Relays (alarm outputs) are used to transmit alarms to
devices equipped with alarm input functions, such as
warning lamps and door opening devices.
Examples of applications for relays)
Warning siren, warning lamp, light, door, etc.
Make settings concerning relays in the “Relay Setting”
screen.
Settings Related to Relays
To display the “Relay Setting” screen, click (Relay
Setting) in the “Setup” screen.
After setting each of the items, click [Test] and confirm the
relay status.
To use relays, the alarm output pin settings on the device
must also be enabled.
“Relay Setting” Screen Details
Note
A
B