Sony ILME-FR7, Руководство пользователя

Страница: 137 / 458

Help Guide
Interchangeable Lens Digital Camera
ILME-FR7 / ILME-FR7K
Setting the Zoom Type
Set the type of zoom using [Technical] > [Zoom] > [Zoom Type] in the camera menu.
The type of zoom will vary depending on the type of lens that is attached.
Note
Clear Image Zoom is not available in the following cases.
When the [Shooting] > [S&Q Motion] > [Setting] is set to On and the [Frame Rate] setting in the camera menu is higher than 60
fps
When [Project] > [Rec Format] > [Codec] in the camera menu is set to [RAW] or an option that includes RAW
Operating the SERVO/MANUAL select switch on a lens resets the magnification of Clear Image Zoom to 1×.
During Clear Image Zoom operation, the focus area is set to Wide. Also, face/eye detection AF is disabled.
When set to [On(Clear Image Zoom)], the pan/tilt preset function is disabled.
Clear Image Zoom
The unit is equipped with a zoom function that uses image signal processing called Clear Image Zoom. When Clear
Image Zoom is enabled, zoom is supported even for fixed-focus lenses. It can also be used to extend the range beyond
the optical range on a power zoom lens.
The maximum zoom ratio using Clear Image Zoom varies depending on the recording resolution.
For QFHD/4K recording resolution: 1.5×
For HD recording resolution: 2×
5-041-957-11(1) Copyright 2022 Sony Corporation
Type of attached lens
[Zoom Type] setting
[Optical Zoom Only] [On(Clear Image Zoom)]
Fixed-focus lens/Manual zoom
lens Zoom operation is not
supported.
Clear Image Zoom is supported.
Power zoom lens
Optical zoom only is
supported. Optical zoom and Clear Image Zoom are
supported.
137