Sony ILCE-6500, Руководство по обслуживанию

Страница: 19 / 23

ILCE-6500_L2
2-14
2-1-11. IM IMAGER UNIT SECTION
ns: not supplied
Ref. No. Part No. Description
501 A-2078-999-A AS SLIDER UNIT ASSY (4000)
502 4-194-226-01 IM PLATE, LPF RETAINER
503 1-856-621-21 OPTICAL FILTERBLOCK (OFB-01-100)
504 4-281-915-01 IM GS TAPE
505 4-185-993-02 IM SHEET, SPACER
506 4-534-930-01 IM MASK PLATE (880)
507 4-573-432-01 IM RADIATION SHEET A (4000)
508 4-584-330-01 IM GF SHEET L/R (4000)
#238 4-287-436-01 SCREW (M1.7)
#355 4-558-097-11 SCREW (M1.7) (XM7)
#356 3-989-735-11 SCREW (M1.7), NEW TRUSTER, P2
Ref. No. Part No. Description
#356
(0.12 ± 0.02 N·m)
#355
(0.12 ± 0.02 N·m)
#355
(0.12 ± 0.02 N·m)
ns
ns
ns
ns
(Note 2)
ns (Note 1, 3)
(0.12 ± 0.02 N·m)
#238
#238
(0.12 ± 0.02 N·m)
ns
ns
501
502
503
504
504
505
506
507
508
ns
(Note 3)
(All mounted parts and IS-1027 complete board
are not supplied, but they are included in Mecha
Device (4000) Service)
Screw
Note
#238: M1.7 X 3.5
(Black)
4-287-436-01
3.5
1.7
#355: M1.7 X 4.0
(Silver)
4-558-097-11
4.0
1.7
#356: M1.7 X 2.5
(Silver)
3-989-735-11
2.5
1.7
Note 1: Precautions for Replacement of the Mecha Device (4000)
Service
As CMOS Imager may be damaged by static electricity from its
structure, handle it carefully like for the MOS IC.
In addition, ensure that the receiver is not covered with dusts
nor exposed to strong light.
Note 1:
Mecha Device (4000) Service交換時の注意
CMOS
イメージャは構造上，静電気により破壊される恐れが
あるため，
MOS IC
と同様に注意して取り扱ってください。
また，受光部にはゴミの付着，および強い光が入ることのな
いように注意してください。
Note 2: Refer to “Assembly-8: Screw tightening sequence when as-
sembling the IM Heat Sink (4000)”.
Note 2:
“Assembly-8: Screw tightening sequence when assembling
the IM Heat Sink (4000)”
を参照してください。
Note 3: When removing the AS Slider (4000) and
IM Imager Unit Assy (4000), clean the following
positions with alcohol.
IM Imager Unit Assy (4000)
AS Slider (4000)
AS Slider (4000)とIM Imager Unit Assy (4000) を
取り外した際は，図の位置をアルコールで
清掃してください。
Note 3:
IM Imager Unit Assy (4000)
AS Slider (4000)