5
5
Erasing Files
ModelName: ICD-UX522/UX522F/UX523/UX523F
PartNumber: 4-293-033-11
Erasing a File
HOLD•POWER
ERASE
,
/ENTER
You can select a file and erase it as follows.
Note
Once a file has been erased, you cannot retrieve it.
Slide the HOLD•POWER switch in the direction of “POWER” to turn
on the IC recorder (
p. 22), or towards the center to release the IC
recorder from the HOLD status (
p. 16).
The stop mode window appears.
Select the file you want to erase when the IC recorder is in the stop
or playback mode (
Press ERASE.
“Erase?” is displayed and the specified file is played
back for confirmation.
Press
or
to select “Execute.”
Press
/ENTER.
The “Erasing...” animation appears in the display window and the selected
file will be erased.
When a file is erased, the remaining files will advance so that there will be
no space between files.
To cancel erasing
Select “Cancel” in step
, and then press
/ENTER.
To erase a part of a file
Divide the file into two files first (
p. 64
), and then proceed with steps
through
.
Erasing Files