5
5
Preparing the Recorder
ModelName: ICD-UX522/UX522F/UX523/UX523F
PartNumber: 4-293-033-11
Set year, month, day, hour and minute.
Press
or
to set the year (the last two digits of the year), and then press
/ENTER. Repeat this procedure to set month, day, hour, and minute in
sequence.
You can move the cursor to the year, month, day, hour and minute by
pressing
and
.
When you set the minute and press
/ENTER, the clock reflects the
setting.
Press
STOP to return to the stop mode display.
Notes
If you do not press
/ENTER within 1 minute of entering the clock setting data, the
clock setting mode is canceled and the window will return to the display of the stop
mode.
The time is displayed either in 12-Hour with “AM” or “PM,” or in 24-Hour, depending
on the “Time Display” setting in the menu. The default setting differs depending on the
country or region you purchased the IC recorder.
To display the current date and time
While the IC recorder is in the stop mode, press
STOP to
display the current date and time for about 3 seconds.