Sony ICD-PX333, Руководство пользователя

Страница: 106 / 287

Help Guide
How to Use
Preparation
Recording
Playback
Editing
FM radio (ICD-PX333F only)
Menu
Computer
Software
Specifications
Announcements
Troubleshooting
List of Topics
Print
IC Recorder
ICD-PX333/PX333F
Setting the clock
You need to set the clock to use the alarm function or record the date and time.
When you insert batteries for the first time, or when you insert batteries after the
IC recorder has been without batteries for more than 1 minute, “Set Date&Time”
appears, and then the clock setting window appears.
1. Set year, month, day, hour and minute.
Press – or + to set the year (the last two digits of the year), and then
press PLAY/STOP
·
ENTER.
Repeat this procedure to set month, day, hour, and minute in sequence.
When you set the minute, the “Executing...” animation is displayed, and then
the stop mode window appears.
Note
If you do not press PLAY/STOP
·
ENTER within 1 minute of entering the clock
setting data, the clock setting mode is canceled and the window will return to
the display of the stop mode.
When any button not intended for use in setting the clock is pressed during the
clock setting mode, the clock setting is canceled. To set the clock, use the
menu.
The time is displayed either in 12-Hour with “AM” or “PM,” or in 24-Hour,
depending on the “Time Display” setting in the menu. The default setting differs
depending on the country or region you purchased the IC recorder.
Hint
While the IC recorder is in the stop mode, press (stop) to display the
current date and time for about 3 seconds.
You can set the clock using the menu as well.
Back Back to Top
98
Search