96
GB
Additional Information
Recharging the Batteries Using a Computer
You can charge NH-AAA-B2KN
rechargeable batteries (not supplied) by
connecting the IC recorder to your
computer.
Connect the IC recorder to a running
computer, and charge the batteries until the
battery indicator indicates “
.”
It takes about 3 hours and 30 minutes to
fully charge exhausted batteries.*
You can also charge the batteries by using
an AC-U501AD USB AC adaptor (not
supplied) (page 99).
* This is an approximation for the time it
takes to charge from no remaining battery
power to full battery power at room
temperature. It varies depending on the
remaining power and the condition of the
batteries. It also takes more time if the
temperature of the batteries is low, or if the
batteries are charged while you are
transferring data to the IC recorder.
P
Note
While the IC recorder is connected with your
computer, the IC recorder operations are
disabled.
1
Insert rechargeable batteries.
Slide and lift the battery compartment
lid, insert NH-AAA-B2KN rechargeable
batteries with correct polarity, and close
the lid.
2
Connect the IC recorder to your
computer.
Use the USB connecting cable supplied
with the IC recorder to connect the
(USB) connector of the IC recorder
and the USB port of your computer.
Содержание ICD-AX412
Страница 131: ......