Sony HXR-NX5R Скачать руководство пользователя страница 41

Страница: 41 / 148

Re
cor
d

horizontal bands of noise.
You may be able to improve the situation by
adjusting the shutter speed to 1/50 if the power
frequency of your area is 50 Hz, or 1/60 in a 60
Hz area.

• You can switch the shutter speed display

between seconds and degrees ([SHUTTER
DISPLAY], p. 101).

To adjust automatically

Press the SHUTTER button

once. The

shutter speed value disappears, or

appears next to the shutter speed value.

You can set an appropriate brightness level
using the ND filter switch

when the

recording environment is too bright.
The ND filters 1, 2 and 3 reduce the volume
of light to about 1/4, 1/16 and 1/64,
respectively.

flashes during the iris automatic

adjustment, set the ND filter to 1. If

flashes during the iris automatic
adjustment, set the ND filter to 2. If

flashes during the iris automatic
adjustment, set the ND filter to 3.
The ND filter indicator will stop flashing
and remain on the screen.
If

flashes, set the ND filter switch

to OFF. The ND filter icon will

disappear from the screen.

Notes

• If you change the ND filter switch

during

recording, the movie and sound may become
distorted.

• When adjusting the iris manually, the ND filter

icon does not flash even if the light volume
should be adjusted with the ND filter.

• If the camcorder cannot detect the ND filter

position (OFF/1/2/3),

flashes on the screen.

Make sure that the ND filter is set correctly.

Tip

• While recording a bright subject, diffraction

may occur if you close the aperture further

down, resulting in a fuzzy focus (this is a
common phenomenon with video cameras). The
ND filter switch

suppresses this

phenomenon and gives better recording results.

Adjusting the light level (ND
filter)

Содержание HXR-NX5R





















































































































































Результаты поиска

Содержание HXR-NX5R

Отзывы:

Sony HXR-NX5R, Руководство по эксплуатации, Страница: 41 / 148

Результаты поиска

Содержание HXR-NX5R

Отзывы: