Sony HVR-V1N Скачать руководство пользователя страница 24

Страница: 24 / 144

Step 7: Inserting a tape or a “Memory Stick Duo”

See page 114 for details of usable cassettes
and prevention of accidental erasure.

Slide and hold the

OPEN/

EJECT lever in the direction of the
arrow and open the lid.

The cassette compartment automatically
comes out and opens up.

Insert a cassette with its window
facing outwards, then press

The cassette compartment automatically
slides back in.

Note

• Do not push the portion marked

while it is sliding in. It

may cause a malfunction.

Close the lid.

Tip

• The recordable time varies depending on [DV

REC MODE] (p. 75).

To eject the cassette

Open the lid following the same procedure
as described in step

and remove the

cassette.

You can use only a “Memory Stick Duo”
marked with

(p. 118).

Open the jack cover.

Cassette tape

OPEN/EJECT lever

Lid

Содержание HVR-V1N

















































































































































Результаты поиска

Содержание HVR-V1N

Отзывы:

Sony HVR-V1N, Руководство по эксплуатации, Страница: 24 / 144

Результаты поиска

Содержание HVR-V1N

Отзывы: