Sony HVR-M25AE, Руководство по эксплуатации

Страница: 75 / 108

Chapter 5 Adjusting and Setting Through Menus
75
C
hap
te
r 5
A
dj
us
tin
g
an
d Se
tt
in
g
T
h
ro
u
gh Me
n
u
s
DISPLAY
SET
MARKER
BURN
(page 45)
Selects whether to output MARKER BURN or not.
B OFF : Does not output MARKER BURN.
ON : Outputs MARKER BURN.
There are some limitations to the output of MARKER BURN. For details, see page 45 .
ALLSCAN
MODE Zooms out the image on the LCD monitor to check the area surrounding the picture frame
where the external monitor can not display.
B OFF : Disables the ALLSCAN MODE.
ON : Enables the ALLSCAN MODE.
• ALLSCAN MODE is for HDV format only. ALLSCAN MODE does not activate when DVCAM
and DV(SP)-formatted tapes are played.
• If formats are mixed on a tape, the part where the format has changed on a tape causes
distortion of images.
• When [ON] is selected and the output level of COMPONENT OUT is set to 480i, 576i,
480p/480i, or 576p/576i, output images from the S VIDEO OUT jack and VIDEO OUT jack
are down converted to letter box. For details,
see page 88 .
• Once the unit turns off, the setting of [ALLSCAN MODE] is set to [OFF] automatically.
• When you set [MARKER BURN] and [ALLSCAN MODE] in the [DISPLAY SET] menu to
[ON] at the same time, the marker will not appear in the correct position on the LCD
monitor. This is not a malfunction. The marker will be output correctly via each video jack.
DATA CODE
(page 39)
Selects whether or not to display the data codes on the analog video output.
B OFF : Does not display the data codes.
DATE : Displays the date and time when recorded.
LETTER SIZE Selects the character size of the menu at the cursor.
B NORMAL : Normal size
2 ×: Double height size
DATE
DISPLAY Selects the date display in the data code display.
Y/M/D : Displays YY/MM/DD (year/month/day).
M/D/Y : Displays MM/DD/YY (month/day/year).
(Default setting for the HVR-M25AU/M25AN.)
D/M/Y : Displays DD/MM/YY (day/month/year).
(Default setting for the HVR-M25AE/M25AP.)
TIME
DISPLAY Selects the time display in the data code display.
12H : Displays 12-hour time. (Default setting for 60i.)
24H : Displays 24-hour time. (Default setting for 50i.)
REMAINING
(page 24)
B AUTO : The remaining tape time is displayed for 8 seconds under the following
conditions.
– If the remaining tape time is determined when you turn on power while a
cassette is loaded in the unit.
– When you press the PLAY button.
Always displays under the following conditions.
– Fast forward, rewind
– Fast forward during playback, rewind during playback
ON : Always displays the remaining tape time.
LCD BRIGHT Adjusts the LCD monitor brightness. Press the J / j buttons and the EXEC button to adjust
the brightness. (The mark under the bar indicates the default setting value.)
LCD COLOR Adjusts the color density of the LCD monitor. Press the J / j buttons and the EXEC button to
adjust the brightness. (The mark under the bar indicates the default setting value.)
LCD BLACK Mutes the images on the LCD monitor and displays only the text data.
B OFF : Does not mute the images
ON : Mutes the images
When [ON] is selected, the images output from the rear panel to the external monitor are not
muted.
Icon/Menu Submenu Setting
Note
Notes
Note