Sony HVR M15U - Professional Video Cassete recorder/player, Руководство по обслуживанию

Страница: 2 / 250

— 2 —
HVR-M15J/M15U/M15N/M15E/M15P/M15C
ENGLISH JAPANESE
ENGLISH JAPANESE
SPECIFICATIONS
These specifications are extracted from instruction manual of
HVR-M15U/M15N/M15E/M15P.
System
Video/Audio recording/playing Head System
Rotating dual-head helical scan
Audio recording format (HDV)
MPEG-1 Audio Layer2
16-bit 48 kHz (stereo)
Transfer rate 384 kbps
Audio recording format (DVCAM (DV))
12-bit Fs32K (Channel 1/2,
Channel 3/4)
16-bit Fs48K (Channel 1/2)
Video signal 1080/60i, NTSC color,
EIA standard system
1080/50i, PAL color,
CCIR standard system
Usable cassettes Standard DVCAM cassettes with
mark
Mini DVCAM cassettes with
mark
Tape speed (HDV)
Approx. 18.812 mm/s
Tape speed (DVCAM)
Approx. 28.218 mm/s
Tape speed (DV) Approx. 18.812 mm/s
Recording/playback time (HDV)
Approx. 276 min
(using PHDV-276DM)
Approx. 63 min
(using PHDVM-63DM)
Recording/playback time (DVCAM)
Approx. 184 min
(using PHDV-276DM)
Approx. 41 min
(using PHDVM-63DM)
Recording/playback time (DV SP)
Approx. 276 min
(using PHDV-276DM)
Approx. 63 min
(using PHDVM-63DM)
AUDIO jacks
IN Pin jack: –10 dBu
Impedance: Minimum 10 k
Ω
(kilo ohms), unbalanced
Maximum input level:
+16 dBu (approx. 5 Vrms)
60i system
+14 dBu (approx. 4 Vrms)
50i system
OUT Pin jack
Impedance: Maximum 1 k
Ω
(kilo ohms)
Output level: 47 k
Ω
(kilo ohms) loading, unbalanced
–10 dBu (= full bit –20 dB)
60i system
–10 dBu (= full bit –18 dB)
50i system
VIDEO jacks
IN/OUT Pin jack, unbalanced
1.0 Vp-p
(75
Ω
(ohms), sync negative)
Sync signal:
0.286 Vp-p (60i/NTSC)
0.3 Vp-p (50i/PAL)
Burst signal:
0.286 Vp-p (60i/NTSC)
0.3 Vp-p (50i/PAL)
S VIDEO jacks
IN/OUT Mini DIN 4-pin, unbalanced
Luminance signal:
1.0 Vp-p
(75
Ω
(ohms), sync negative)
Sync signal:
0.286 Vp-p (60i/NTSC)
0.3 Vp-p (50i/PAL)
Chrominance signal:
0.286 Vp-p (60i/NTSC)
(burst, 75
Ω
(ohms))
0.3 Vp-p (50i/PAL)
(burst, 75
Ω
(ohms))
General
Peak inrush current
Hot switching inrush current,
measured in accordance with
European standard
EN55103-1 : 5.0 A (230 V)
Power requirements
8.4 V (DC IN jack)
Power consumption
8 W (during playback)
Operating temperature
5 ˚C to 40 ˚C (41 ˚F to 104 ˚F)
Storage temperature
–20 ˚C to +60 ˚C
(–4 ˚F to +140 ˚F)
Dimensions Approx. 180
×
72.8
×
267.1 mm
(7
1
/
8
×
2
7
/
8
×
10
5
/
8
inches)
(w/h/d, including projecting parts
and controls)
COMPONENT OUT jacks
OUT Pin jack
Output at 480i NTSC
With [BETACAM] selected in [IN/OUT REC]
menu
Y: 1.0 Vp-p
(with 0.286 Vp-p sync negative,
output impedance 75
Ω
(ohms),
unbalanced)
Pb/Cb/B-Y, Pr/Cr/R-Y: 0.7 Vp-p
(output impedance 75
Ω
(ohms),
unbalanced)
(75% color bars with 7.5 IRE
setup)
With [SMPTE] selected in [IN/OUT REC] menu
Y: 1.0 Vp-p
(with 0.3 Vp-p sync negative,
output impedance 75
Ω
(ohms),
unbalanced)
Pb/Cb/B-Y, Pr/Cr/R-Y: 0.7 Vp-p
(output impedance 75
Ω
(ohms),
unbalanced)
(100% color bars with no setup)
Output with other settings
Y: 1.0 Vp-p
(output impedance 75
Ω
(ohms),
unbalanced)
Pb/Cb/B-Y, Pr/Cr/R-Y: 0.7 Vp-p
(output impedance 75
Ω
(ohms),
unbalanced)
(100% color bars with no setup)
480i/480p:
Y: with 0.3 Vp-p sync negative
1080i:
Y/Pb/Pr: with 0.6 Vp-p 3-level
sync
HDV/DV jack
i.LINK (IEEE1394,
4-pin connector S100)
Remote control
LANC Stereo mini-minijack (ø 2.5)
CONTROL S IN Stereo minijack (ø 3.5)
184 (7 1/4)
261 (10 3/8)
180 (7 1/8)
69 (2 3/4)
3.8 (5/32)
151 (6)
6.1 (1/4)
Unit: mm (inches)
Mass Approx. 2.3 kg (5 lb. 1 1 /
8
oz.)
Supplied accessories
Remote Commander (1)
AC adaptor (1)
Power cord (1)
Rack (1)
Size AA batteries (2)
Cleaning cassette (1)
Operating
See page 5-27.
instructions (1)
AC adaptor
Power requirements
100 – 240 V AC, 50/60 Hz
Current consumption
0.35 – 0.18 A
Power consumption
18 W
Output voltage
DC OUT: 8.4 V *
Operating temperature
0 ˚C to 40 ˚C (32 ˚F to 104 ˚F)
Storage temperature
–20 ˚C to +60 ˚C (–4 ˚F to +140 ˚F)
* See the label on the AC adaptor for other
specifications.
Design and specifications are subject to change
without notice.