Sony HVO1000MD, Руководство пользователя, Страница: 46 / 148

46
Capturing Still Images
C
h
ap
te
r 4
R
e
c
o
rd
in
g
an
d
P
lay
ba
c
k
4
When the data transfer is complete, use the
B
and
b
buttons to select [Close], and press the ENTER button.
The [MENU] screen appears again.
You can record up to 24 continuous hours in one session.
After 24 hours, recording will stop automatically.
Recorded data directory
Video data is stored in one of the following directories,
depending on the system administrator settings.
Video data directory
<uppermost folder of the external media>/<recording start
date (year, month, day, hour, minute, second)_patient ID>/
MOVIE/
or
<uppermost folder of the external media>/<patient ID>/
<recording start date (year, month, day, hour, minute,
second)>/MOVIE/
• Depending on the system administrator settings,
recorded data files will be split in 2 GB or 4 GB intervals
(approximate) when saved to the internal hard disk and
external media.
• The order of the year, month, and day of the recording
date used in the storage directory is based on the date
format of the system settings.
• If the power supply is disconnected before the writing of
the data is complete, the validity of the written data
cannot be guaranteed.
• When recording to external media, the media can be
switched out up to three times for a single piece of
recorded data. When this limit is exceeded, the
“Exchange media limit exceeded” message appears on
the [End Recording] screen.
Capturing Still Images
You can capture a particular shot during a live
transmission, and store it as a still image file.
Still images can be captured manually or via contact
switch. This section describes how to capture still images
manually.
For details on contact switch controls, contact your local
Sony representative.
Manual Still Image Capture
To capture a still image, press the CAPTURE button on
the infrared remote control unit or the front panel of the
unit at the moment you want to capture the still image.
A chapter separator is also created at the position in which
the still image was captured.
Infrared remote control unit
Front panel
Note
Notes
Note
CAPTURE button
CAPTURE button