Sony HVO-3300MT, Инструкция по эксплуатации

Страница: 49 / 99

49
After 5 seconds of recording, playback starts
automatically.
When test recording is finished, the [Recording
Preparation] screen appears again.
3
Select [Done], and press the ENTER button.
The [MENU] screen appears again.
Recording
Images can be recorded manually or via contact switch.
This section describes how to record manually.
For details on configuring patient information and
storage destinations for recorded data beforehand, see
“Recording Preparation” (page 45).
For details on how to record via contact switch, contact
your local Sony representative.
Note on the auto delete function for
recorded data
Whenever the remaining capacity on the unit’s internal
hard disk becomes low, an auto delete function
automatically deletes recorded data, starting with the
oldest start dates for recording. This is done to maintain
free space on the unit’s internal hard disk at all times.
To disable the auto delete function, set [Auto Delete] to
[Not Used] in the [System Admin Settings] screen.
When [Auto Delete] is set to [Not Used], recording will
stop automatically when the remaining capacity becomes
low.
Manual Recording
1
Press the
z
REC button.
Recording starts.
“REC” appears on the front panel display while
recording is in progress.
2
Press the
x
STOP button to stop recording.
3
To end the surgical procedure or examination
recording session, press the CLOSE FOLDER
button.
A confirmation message for ending recording
appears.
4
Select [OK], and press the ENTER button.
The [End Recording] screen appears, and the status of
data transfer to external media, for example, appears.
Wait a moment for the writing process to complete.
Tip
Tip