background image

34

Configuring Recording 
Settings (User Settings)

Configure input signal and image quality settings in the 
[User Settings] screen.
You can navigate menus using the navigation buttons on 
the front panel of the unit.

Displaying the [User Settings] 
Screen

1

Press the MENU button.

The [MENU] screen appears.

2

Select [Settings], and press the ENTER button.

The [Settings] screen appears.

3

Select [User Settings], and press the ENTER button.

The [User Settings] screen appears

4

Select a tab, and configure the settings as necessary.

Configuring Input/Output Signal 
Settings

Select the video and audio input/output signals.

1

Display the [I/O Switch] tab, and configure each 
setting.

[Video Ch1]

Select the Ch1 input signal.
Only the signals selected in [Ch1 IN Signal Display] 
in the [System Admin Settings] screen – [Function 
Settings] screen – [Input Signal 2] tab will be 

displayed as options for selection. However, if [HD/
SD Rec Mode] is set to [SD Record] in the [System 
Admin Settings] screen – [Function Settings] screen 
– [Recording] tab, 3D input signals will not be 
displayed.
The default setting is the input signal displayed at the 
top among those selected in [Ch1 IN Signal Display] 
in the [System Admin Settings] screen – [Function 
Settings] screen – [Input Signal 2] tab.

Configure the output mode in [Advanced]. For 
details on this setting, see “To configure the output 
mode” (page 35).

[Video Ch2]

Select the Ch2 input signal.
Ch2 only supports 2D input signals.
Only the signals selected in [Ch2 IN Signal Display] 
in the [System Admin Settings] screen – [Function 
Settings] screen – [Input Signal 2] tab will be 
displayed as options for selection.
The default setting is the input signal displayed at the 
top among those selected in [Ch2 IN Signal Display] 
in the [System Admin Settings] screen – [Function 
Settings] screen – [Input Signal 2] tab.

• When [Ch2 Rec] is set to [Create 2D from Ch1] in 

the [User Settings] screen – [Rec/Streaming] tab, 
the setting will be fixed at a 2D version of the Ch1 
signal.

• When [CMS Mode] is set to [Use] in the [System 

Admin Settings] screen – [Function Settings] 
screen – [CMS] tab and [Ch2 Rec] is set to [Not 
Used] in the [User Settings] screen – [Rec/
Streaming] tab, this setting cannot be configured.

[Audio]

Select the audio input format.
You can select from [LINE] and [MIC].
The default setting is [LINE].

[Mic Plug-In Power]

Select whether to supply power to the microphone 
from the unit.
This item is available when [Audio] is set to [MIC].
The default setting is [Not Used].
You can configure the voltage that is supplied in the 
[System Admin Settings].

[Output Channel]

Select the output video channel.
The default setting is [Ch1].

2

To configure image quality settings, proceed to 

“Configuring Image Quality Settings” (page 35)

.

If you are finished configuring settings, select 
[Apply] and press the ENTER button.

Tips

Содержание HVO-3300MT




































































































Отзывы: