Sony HVL-F60M, Руководство по эксплуатации, Страница: 26 / 209

GB
26
• Depending on the conditions of use or the age of the batteries, the battery dead
screen may appear without the low battery indicator being shown.
• Even if the low battery indicator appears, it may disappear when you change
from flash to LED light or vice versa.
Overheat indicator
During continuous flash use or use in a high temperature environment, this unit
becomes hot and its internal safety circuit temporarily prevents firing. (Overheat)
• The overheat screen is displayed when overheating is detected.
• The flash operation is suspended until the temperature of the unit falls.
• Press any button on the flash unit to change to another screen. If that is the
normal indicator screen, the indicator flashes. (MODE button and LIGHT
button are disabled)
• Set the power switch to OFF, and then stop use of the flash unit for Approx.
10 minutes to allow the temperature of the unit to cool down.
Overheat screen