Sony HT-Z9F, Руководство по эксплуатации

Страница: 60 / 291

60
US
[Transmitter]: This system is in
transmitter mode, which enables it to
send audio to the BLUETOOTH
compatible headphones. If you switch
the input of the system, “BT TX” appears
on the front panel display.
[Off]: The BLUETOOTH function is turned
off and you cannot select the [Bluetooth
Audio] input.
[Device List]
Displays a list of paired and detected
BLUETOOTH devices (SNK device) when
[Bluetooth Mode] is set to [Transmitter].
[Bluetooth Codec - AAC]
This function is only available when you
set [Bluetooth Mode] to [Receiver].
[On]: Enables AAC codec.
[Off]: Disables AAC codec.
You can enjoy high-quality sound if AAC is
enabled and your device supports AAC.
[Bluetooth Codec - LDAC]
This function is only available when you
set [Bluetooth Mode] to [Receiver] or
[Transmitter].
[On]: Enables LDAC codec.
[Off]: Disables LDAC codec.
• You can enjoy more high-quality sound if
LDAC is enabled and your device supports
LDAC.
• When connecting BLUETOOTH
compatible headphones, this setting
cannot be changed.
[Wireless Playback Quality]
You can set the transmission data rate
of LDAC playback. This function is only
available when you set [Bluetooth
Mode] to [Transmitter] and [Bluetooth
Codec - LDAC] to [On].
[Sound Quality]: The highest bit rate is
used. Sound is sent in a higher quality;
however, audio playback sometimes
may become unstable when the link
quality is not good enough. If audio
playback is unstable in this mode, select
[Auto].
[Auto]: The data transfer rate is
automatically changed depending on
the environment.
[OSD Language]
You can select the language you want
for the system on-screen display.
[IR-Repeater]
[On]: Remote signals for the TV are sent
from the rear of the main unit.
[Off]: Turns off the function.
For details, see “When the TV Remote
Control does not Work” (page 33).
[Network/Bluetooth Standby]
[On]: You can turn the system on via the
network or BLUETOOTH function.
[Off]: You can save power in standby
mode. It takes time to output sound
from the subwoofer or rear speakers
after turning the system on.
• If you agree to use the Chromecast built-
in function, [Network/Bluetooth Standby]
automatically switches to [On].
• If you set [RF Channel] to [On] (page 33),
[Network/Bluetooth Standby]
automatically switches to [On].
[Auto Standby]
[On]: Turns on the [Auto Standby]
function. When you do not operate the
system while no signal is input for about
20 minutes, the system enters standby
mode automatically.
[Off]: Off
[Software Update Notification]
[On]: Sets the system to inform you of
latest software version information
Note
Notes
[System Settings]
Notes