20
GB
Insert two R6 (size-AA) batteries in the
RM-AAU059 Remote Commander.
Observe the correct polarity when installing
batteries.
Notes
• Do not leave the remote in an extremely hot or
humid place.
• Do not use a new battery with old ones.
• Do not mix manganese batteries and other kinds of
batteries.
• Do not expose the remote sensor to direct sunlight
or lighting apparatuses. Doing so may cause a
malfunction.
• If you do not intend to use the remote for an
extended period of time, remove the batteries to
avoid possible damage from battery leakage and
corrosion.
• When you replace the batteries, the remote buttons
may be reset to their factory settings. If this
happens, reassign the button again (page 36).
• When the remote no longer operates the receiver,
replace all the batteries with new ones.
6: Adjusting the speaker
levels and balance
(TEST TONE)
You can adjust the speaker levels and balance
while listening to the test tone from your
listening position.
Tip
The receiver employs a test tone with a frequency
centered at 800 Hz.
1
Press AMP MENU.
“T. TONE” appears on the display.
2
Press
or
b
to enter the
parameter.
3
Press
V
/
v
repeatedly to select
“T. TONE Y”.
The test tone is output from each speaker
in sequence as follows:
Left
t
Right
t
Subwoofer
Inserting batteries into the
remote
-/--
>10/
1
2
3
4
6
7
8
0/10
ENTER
9
SYSTEM STANDBY
SLEEP
TV INPUT
VIDEO
DVD/BD
SAT
TV
BASS
RETURN/EXIT
MEMORY AMP MENU
CLEAR
DISPLAY
MUTING
MASTER VOL
TV VOL
SOUND
FIELD
D.TUNING
D.SKIP
DVD/BD
MENU
SA-CD/CD TUNER
?/1
-
5
>10/
TV
?/1
AV
?/1
TOOLS/
OPTIONS
MENU/HOME
TREBLE
MASTER
VOL +/–
Input
buttons
AMP
MENU
V
/
v
/
B
/
b
,