background image

39

GB

Ad
v

a

nce

d

 Setti

ngs

Enjoying the sound at low 
volume (NIGHT MODE)

You can enjoy sound effects and hear the dialog 
clearly even at a low volume level using this 
function.
• ON:

Turns on the “NIGHT MODE” 
function.

• OFF: Turns off the function.

• You can listen to Dolby Digital sound at low volume 

by using AUDIO DRC (page 38).

Setting the sound from the 
satellite tuner (INPUT MODE)

When multi-channel sound does not output, even 
if you connect the receiver and the satellite tuner 
via HDMI cable, connect the digital optical 
cable.
• AUTO: Preferentially output the sound signal 

from the HDMI SAT/CATV input 
jack.

• OPT:

Output the signal from the OPT SAT/
CATV IN jack.

Setting the Control for HDMI 
function (CTRL HDMI)

You can change the settings of the Control for 
HDMI function.
• ON:

Set the Control for HDMI to “ON.”

• OFF: Select this item when you want to 

connect equipment not compatible with 
“BRAVIA” Sync, or that do not have 
HDMI jacks, etc.

Using the power saving 
function on HDMI signal pass 
through (PASS THRU)

Power consumption in standby mode is reduced 
automatically when the TV is turned off.
• AUTO: When the TV is turned on while the 

receiver is in standby mode, the 
receiver outputs HDMI signals from 

the receiver’s HDMI output jack. We 
recommend this setting if you use a 
TV that is compatible with 
“BRAVIA” Sync. This setting saves 
power in standby mode compared with 
the “ON” setting.

• ON:

When the system is in standby mode, it 
always passes HDMI signals through.

• When “AUTO” is selected, it may take a little more 

time for the picture and sound to be output to the TV 
than when “ON” is selected.

Setting the Audio Return 
Channel (ARC) function

You can change the settings for the Audio Return 
Channel (ARC) function.
• ON:

Select this item when you connect the 
receiver to a TV compatible with the 
Audio Return Channel (ARC) function 
via an HDMI cable.

• OFF: Select this item when you connect the 

receiver to a TV via a digital optical 
cord.

Changing the brightness of 
the front panel display 
(DIMMER)

The brightness of the front panel display can be 
set to one of 2 levels.
• ON:

Dim.

• OFF: Bright.

Auto Standby function (AUTO 
STBY)

You can reduce power consumption. The 
receiver enters standby mode automatically 
when you do not operate the receiver for about 
30 minutes and the receiver is not receiving an 
input signal.
• ON:

Turns on the “AUTO STBY” function.

• OFF: Turns off the function.

Tip

Note

continued

Содержание HT-CT550W

















































Отзывы: