Sony HKSR-9003, Руководство по эксплуатации

Страница: 41 / 177

Basic Settings with the Subdisplay 41
Chap
ter
3
Ba
s
ic
Ad
jus
tme
nt
s
an
d Set
tings
AP-1 Assistant Panel
You can also use the operation section on the
right-side panel of the main unit to operate the
subdisplay of the AP-1, and use the AP-1 to
operate the subdisplay on the right-side panel.
However, the LOCK switches function
independently. When you want to lock the
operation section on the right side panel, or lock
the AP-1, set the LOCK switch on that side to
ON.
To display setting pages
After the unit is turned on, the current operation
mode (CINE or CUSTOM) appears on the
subdisplay for several seconds, followed by the
most recently used settings page.
To advance one page
Press the PAGE button.
To go back one page
Press the SET button (press and release the button
within 1 second).
To change a setting
1
Press and hold the SET button for more
than 1 second.
The unit enters data modification mode, the
cursor ( | ) starts flashing, and a question
mark appears at the rightmost position on the
first line.
On a page with two or more setting items,
pressing the SET button moves the cursor to
the next item.
2
Move the cursor to the item to be set,
then change the setting by turning the
MENU SEL/ENTER dial.
Note
Camera menu operations on the viewfinder screen
cannot be performed while the subdisplay is in data
modification mode.
To confirm a change
Do one of the following:
• Press the PAGE button.
• Exit data modification mode by pressing the
MENU SEL/ENTER dial (the cursor and
question mark disappear).
• Terminate the subdisplay operation by pressing
the VF MENU/DISPLAY button.
To cancel a change
Press the CANCEL/STATUS button before
confirming the change. The question mark
disappears, and the original setting is restored.
To terminate subdisplay operation
Press the VF MENU/DISPLAY button.
The electronic shutter settings of the unit can be
displayed and adjusted as exposure time values,
or as shutter angle values, as with a film camera.
There are two adjustment modes for angles: Step
mode and Continuous mode.
VF MENU/
DISPLAY button
PAGE button
CANCEL/STATUS button
MENU SEL/
ENTER dial
a)
Press
Turn
SET button
a) Turning the dial changes a setting, and pressing it
confirms a setting (ENTER button function).
Shutter Settings
Cursor (flashing) Question mark
Cursor