Sony HKSR-9003, Руководство по эксплуатации

Страница: 130 / 177

VTR Menu List 130
Chap
te
r
5
Men
u
Con
fig
ur
at
ion an
d D
e
ta
iled
S
e
tt
in
gs
The TC (timecode) Setup menu allows you to make settings related to timecode.
• Factory default settings are underlined.
• Square brackets indicate settings as displayed in setting windows
(see page 129) .
VTR Menu List
TC Setup Menu
Item Settings
TIMER SEL Selects the type of time data to use.
CTL [CTL Timer]: Display the tape running time in
Hours:Minutes:Seconds format.
TC [Time Code]: Display timecode.
UBIT [User Bit]: Display user bits.
TIMER RESET Resets the internal timecode generator. Time data is
displayed as 00:00:00:00 (timecode) or 00 00 00 00 (user
bits).
Note
The values read by the timecode reader cannot be reset.
The timecode generator cannot be reset when it is locked to
external timecode or to the values read by the internal timecode
reader.
TIMER PRESET Selects the type of time data to preset to an arbitrary value.
TCG TC: Timecode generated by the timecode generator
TCG UBIT: User bits generated by the timecode
generator
CTL: CTL signal count
TCR SEL Selects the type of timecode which you want the internal
timecode reader to read during playback.
AUTO [AUTO]: Read VITC when the playback speed is
less than ±
1
/
2
times normal speed, and LTC when the
playback speed is more than ±
1
/
2
times normal speed.
LTC [LTC]: Read LTC.
VITC [VITC]: Read VITC.
TCG MODE Selects the type of timecode to which the internal
timecode generator synchronizes.
PRST [Preset]: Synchronize to a preset value. You can
use the TIMER PRESET item to preset the initial
value of the timecode generated by the internal
timecode generator.
RGN [Regen]: Synchronize to the timecode selected in
the following item REGENE SOURCE (regenerate).