Sony HKSR-5803HQ, Руководство по эксплуатации

Страница: 194 / 211

194
Menu List
App
endi
x
Items Relating to the HKSR-5804 (Nos. B01 to ...)
A23 V CROP POSITION
(FC) –238
[0]
238
When “EDGE-CROP” is selected in menu item A21,
adjusts the V crop (vertical direction of portion cut out in
edge crop mode) for FC output.
A24 FC LUT MODE [off]
Bank-1
Bank-2
Bank-3
Bank-4
Bank-5
Bank-6
Bank-7
Bank-8
Selects whether to use LUT, and when LUT is used, selects
the bank in which the LUT file is stored.
off: LUT conversion is disabled.
Bank-1 to Bank-8: Select the LUT file by selecting one of
Banks 1 to 8.
Item number Item Setting Function
B01 NW I/O mode Performs settings for the signal output to the AUX OUTPUT
A/B connectors.
Sub item
SDI mode
[MON]
DUB
Selects the signal output to the AUX OUTPUT A/B
connectors.
MON: The HD SDI signal is output.
DUB: The signal used for dubbing the tape with non-
compressed data (DATA) format is output.
BO2 NW MON CTRL Performs settings for the monitor output.
Sub items
LUT
[off]
Bank-1
Bank-2
Bank-3
Bank-4
Bank-5
Bank-6
Bank-7
Bank-8
Selects one of the eight lookup table (LUT) banks.
Off: Does not use any LUT.
Bank 1 to Bank 8: Uses the selected LUT bank.
COLOR SPACE
[RGB]
YCbCr
Selects the monitor output signal.
RGB: Outputs an RGB 4:4:4 signal.
YCbCr: Outputs a YCbCr 4:2:2 signal.
PRE LUT RANGE [off]
H t F
Specifies whether the monitor output signal is extended
from Head to Full before the LUT.
Off: Does not extend from Head to Full before the LUT.
H
t F: Extends from Head to Full before the LUT.
POST LUT RANGE
[off]
F
t
H
Specifies whether the monitor output signal is compressed
from Full to Head after the LUT.
Off: Is not compressed from Full to Head after the LUT.
F
t
H: Is compressed from Full to Head after the LUT.
Item number Item Setting Function