Sony HKSR-5803HQ Скачать руководство пользователя

Страница: 109 / 211

109

4-6 AUDIO Menu

ap
te

r 4

enu

Se
tt

Press

[F9]

(SD OUT EXCHNG) to set the display to

“ena”s.

ena:

Enable the settings of this menu.

dis:

Disable the settings of this menu, and use the

settings for CH1 to CH8 of DIGOUT EXCHNG.

Select the digital audio output signal for each channel.

TR1 to TR2:

Output the audio signals recorded on

tracks 1 to 12.

Press the

[F10]

(EXIT) button.

This returns to the AUDIO menu.

Making output settings for individual channels
with the F buttons

By pressing any of the

[F1]

(SDOUT CH1 TR1) to

[F8]

(SDOUT CH8 TR8) buttons, you can select the source
track for each channel.

Making input signal selections for individual
channels with the numeric buttons

Press the cursor

button, to align the cursor

with the channel for which you want to make the
selection.

Press the cursor

button, to select the source

channel to be output.

To return to the default settings

Press the cursor center button. The cursor item returns to
the default.

To revert the source tracks of all channels to
default settings

Press the

[F9]

(SDOUT ALL RESET) button in the

ALT+SD OUT menu.
The source tracks of all channels return to their default
settings.

You can also make the source track selection using the
VTR SETUP menu item 836 “SD AUDIO OUTPUT
EXCHANGE”.

4-6-4 External Device Audio Edit
Preset Command Replace Mode
Selection (EDIT PRESET REPLACE
CHANNEL SELECT)

You can replace channel settings for audio edit preset
commands received from editors and other external
devices. This function allows such devices to control
channels 1 to 12 on this unit.

Press the ALT/

[F2]

(REPLCE CH SEL) buttons.

The REPL CH SEL menu appears, together with the
edit preset channel selection menu for each channel on
this unit.

Press the

[F9]

(REPLCE CH SEL) button repeatedly

until “ena” is displayed.

ena:

The settings of this menu are enabled.

dis:

The settings of this menu are disabled and the

settings made in EDIT PRESET REPLACE
MODE SELECT and ANALOG AUDIO EDIT
PRESET REPLACE are used.

Select the edit preset channel for each channel.

CH1 to CH12:

The edit preset command of the

selected edit preset channel controls the channel
of this unit.

Press the

[F10]

(EXIT) button.

The ALT+AUDIO menu appears again.

Setting channels for individual tracks using the F
button

You can set channels for individual tracks by pressing the

[F1]

(REPLCE TR1) to

[F8]

(REPLCE TR8) buttons, or by

pressing the ALT button to go to the ALT+REPL CH
menu, and then pressing

[F1]

(REPLCE TR9) to

[F4]

(REPLCE TR12) buttons.

Содержание HKSR-5803HQ




















































































































































































































Результаты поиска

Содержание HKSR-5803HQ

Отзывы:

Похожие инструкции для HKSR-5803HQ

Бренды по названию

Популярные бренды

Sony HKSR-5803HQ, Руководство по эксплуатации

Результаты поиска

Содержание HKSR-5803HQ

Отзывы:

Похожие инструкции для HKSR-5803HQ

Бренды по названию

Популярные бренды