Sony HKSR-101, Руководство по эксплуатации

Страница: 51 / 128

C
h
ap
te
r 4
M
e
nu
S
e
tti
n
gs
51
4-3 VIDEO Setup Menu
LUT(MON)
For details
about LUT file
operations,
see “Monitor
LUT Function”
(page 120).
LUT MODE Selects whether or not to perform LUT conversion, and selects the bank that contains the LUT file
to use when LUT conversion is performed.
OFF [Off]: Do not perform LUT conversion.
BANK0 [Bank 0]: Select the LUT file of Bank0.
BANK1 to BANK3 [Bank 1 to Bank 3]: Select the LUT file of one of Bank1 to BANK3.
F
t H [Full to Head]: Instead of using a LUT file, generate and display standard video levels from
64 (0% black) to 940 (100% white) steps for signals that exceed the HD video level range (10-
bit signal levels, 4 to 1019 steps).
LUT
STATUS Displays a list of the LUT files in the banks. The currently selected file is displayed in yellow. You
can select a file to display simple I/O curves, and to delete unneeded LUT files from the banks.
LUT LOAD Loads a LUT file from a “Memory Stick” to a bank.
LUT SAVE Saves a LUT file from a bank to a “Memory Stick”.
LUT
RESET Deletes all LUT files from Bank0 to Bank3.
LEVEL CLIP 444
t
422 When the RGB 4:4:4 format is selected, selects whether to clip black level 0% and lower for 4:4:4
to 4:2:2 conversion of the output from the MONITOR OUT HD/SD SDI connector.
BLACK [Black Clip]: Clip.
OFF [Clip Off]: Do not clip.
Item Settings