Sony HKSR-101, Руководство по эксплуатации

Страница: 105 / 128

A
ppe
ndix
e
s
105
Error Messages and Warning Messages
Error messages
Refer to the Maintenance Manual for more detailed
information about the content of error messages, and about
errors not listed here.
Code Message Description
SRW-1 error
a)
SRPC-1 error
b)
0010 0110 FAN STOP A cooling fan stopped.
0011 0111
0012 —
0014 0114 DC VOLTAGE DOWN Decline in DC voltage was detected.
— 0115 BATT TEMPERATURE NG Abnormal battery temperature was detected.
(Exchange the battery.)
0050 — NO REC RF Recording error occurred. Could not detect RF
signal.
0057 — EQ NVRAM SUM ERROR EQ NVRAM operating error was detected.
0058 — CONT REC NG TC Sequential recording error was detected.
005A — CONT REC NG SV Sequential recording error was detected.
005C — TIMER REC NG Timer Rec error was detected.
005F — EQ TEMP NG Abnormal EQ temperature was detected.
0060 — SLACK-10 Drum drive voltage error was detected.
0061 — SLACK-11 Drum FG error was detected.
0062 — SLACK-12 Drum PG error was detected.
0063 — SLACK-35 S reel rotation was detected in stop mode.
0064 — SLACK-45 Abnormal ratio of T reel speed to capstan speed was
detected during fast forward.
0065 — SLACK-75 It is necessary to check the cassette.
0066 — SLACK-70 Servo NVRAM communications error was detected.
0067 — SLACK-71 System control initialization command error was
detected.
0068 — SLACK-20 Capstan drive voltage error was detected.
0069 — SLACK-21 Capstan FG error was detected.
006B — SLACK-23 Capstan rotation direction error was detected.
006C — SLACK-24 Capstan speed error was detected.
006D — SLACK-100 Tension error was detected during rewind.
006E — SLACK-50 Tape adhesion was detected at the position
immediately after the start of tape threading.
006F — SLACK-51 Tape adhesion was detected at the position where
tape threading is in progress.
0070 — SLACK-72 The SE and SV board combination is incorrect.
0071 — SLACK-61 Function cam forward rotation time-out error was
detected.
0072 — SLACK-62 Function cam reverse rotation time-out error was
detected.
0073 — SLACK-63 Tape top detection time-out error was detected.
0074 — SLACK-64 Full top detection time-out error was detected.
0075 — SLACK-65 Tape end detection time-out error was detected.
0076 — SLACK-66 Cassette ejection error was detected.