19
Setup Menu
Menu List
The following conventions are used in the menu list table.
Settings column values
(e.g.
ON, OFF, 0
): Default settings
ENTER to execute
: Press the control knob or move the CANCEL/ENTER lever to the ENTER position to execute.
SYSTEM OPERATION menu
Note
Page name
Page No.
Item
Settings
Indication
<OUTPUT SELECT>
S01
OUTPUT
CAMERA
, BAR, TEST1, TEST2
Output signal selection
TEST1 and TEST2 are not selectable if there is no
communication with the camera.
PIX
ENC
, R, G, B, R&G, G&B, R&B,
RGB
PIX connector output signal selection
WF
ENC
, R, G, B, SEQ, R&G, G&B,
R&B, RGB
WF connector output signal selection
LASER DIODE
ON
, OFF
Optical output ON/OFF from the CCU (HSCU300RF
only)
<GENLOCK PHASE>
S02
REFERENCE
(NONE), (EXT IN)
Reference signal input status (read only)
GENLOCK
HD,
SD
External reference signal lock mode selection, lock
status, and signal format
(OK), (NG)
External reference signal lock status (read only)
(OK): Locked
(NG): Unlocked
External reference signal format
Displayed only when a reference signal is present
(read only)
H STEP
When GENLOCK is HD:
–3.01 to 3.45 µsec
0.00
When GENLOCK is SD:
–8.29 to 9.48 µs
0.00
Reference signal lock phase adjustment (horizontal
phase, step)
COARSE
–99 to 99
0
Reference signal lock phase adjustment (horizontal
phase)
SC PHASE
0 to
359
Subcarrier phase adjustment
V PHASE
0
to 7
Reference signal lock phase adjustment (vertical
phase)
SYNC OUT
HD SYNC,
SD SYNC
SYNC connector output signal selection
<MULTI FORMAT>
S03
Note
FREQUENCY or
CAMERA FORMAT
mode setting changes
take effect only after the
CCU power supply is
turned off and then on
again.
FREQUENCY
1.001, 1.000
Operating frequency selection
Note
The default setting is different among the sales
areas.
United States and Canada: 1.001
Other areas: 1.000
(525 NTSC), (625 PAL)
(Read only)
When FREQUENCY is 1.001:
(525 NTSC)
(625 PAL): When FREQUENCY
is 1.000
Note
The default setting is different among the sales
areas.
United States and Canada: (525 NTSC)
Other areas: (625 PAL)
CAMERA FORMAT
When FREQUENCY is 1.001:
1080/59.94i, 720/59.94P
When FREQUENCY is 1.000:
1080/50i, 720/50P
Transmission format selection
Note
The default setting is different among the sales
areas.
United States and Canada: 1080/59.94i
Other areas: 1080/50i
