Sony HDXS-C200, Руководство по обслуживанию

Страница: 19 / 106

19
External parts
Ch
ap
te
r 2
De
sc
ript
io
n
Front panel controls and indicators
The front panel provides the following status indicators
and controls, behind the front bezel of the server. Their
functions are described in the following table.
It is necessary to remove the front bezel to gain access to
the front panel indicators/controls functions by pressing
the round recesses in the outside faces of the handles (see
“Front bezel” on page 82 ).
Note
a
USB connector 1 Service use only.
b
USB connector 2 Service use only.
c
NIC 2 LED Not used/disabled.
d
NIC 1 LED Not used/disabled.
e
FAULT LED Red BLINKING = fan temperature or power supply failure.
Server emits a single audible beep (one
per second) when a system fan fails.
Note: The audible alarm does not sound
if a system fan failure occurs prior to
boot-up.
Server emits a double audible beep
(two per second) when the temperature
inside the chassis exceeds the preset
value of 38°C.
Server emits a continuous audible
beep (longer than one second) when a
power supply fails.
OFF = Fan temperature and power supply OK.
f
HDD Activity LED Blue BLINKING = HDD activity/communication to motherboard.
OFF = No HDD activity.
g
POWER LED Blue ON = system power is ON.
OFF = system power is OFF.
h
Reset button Reboots and initializes the system.
i
Alarm Reset button Resets the system alarm for fan/temperature failures.
j
Power ON/OFF button Toggles the system power ON/OFF.