Sony HDW-790, Руководство по эксплуатации

Страница: 85 / 176

85
Status Display on the Viewfinder Screen
Chap
te
r 5
Men
u
Dis
p
la
ys
a
nd Det
a
iled
S
e
ttin
gs
VF DISP 2 page
1) For detailed information on the type of freeze-frame picture, see “5-
3-10 Using the Freeze Mix Function” on page 103 .
3
Turn the MENU knob to move the
b
mark to the item
you want to set, then push the MENU knob.
The
b
mark on the left of the selected item changes to
a
z
mark, and the
z
mark on the left of the setting
changes to a ? mark.
4
Turn the MENU knob to select whether the selected
item should appear in the viewfinder display (the ON
setting), or not appear (the “OFF” setting), then push
the MENU knob.
The
z
mark returns to a
b
mark, and the ? mark
returns to a
z
mark.
Note that pushing the CANCEL/PRST / ESCAPE
switch to CANCEL/PRST on this page has no effect.
5
To continue setting other items, repeat steps
3
and
4
.
6
To end the menu operation, set the MENU ON/OFF
switch to OFF.
5-2-3 Display Modes and Setting
Change Confirmation/Adjustment
Progress Messages
You can limit or suppress the messages that give details of
setting changes and adjustment progress and results by
setting a display mode.
The conditions under which messages are displayed and
their correspondence with the display mode are as follows:
1) This is also displayed for about 3 seconds when the SHUTTER selector is
set to ON.
2) The shutter speed displayed depends on the selected frame frequency. For
details, see “4-2-1 Shutter Modes” on page 62 .
Changing the display mode
You can change the display mode on the VF DISP 1 page
of the USER menu.
1
Follow steps 1 and 2 in “5-2-2 Selecting Display
Items” (page 84) , until the VF DISP 1 page of the
USER menu appears on the screen.
2
Turn the MENU knob to move the
b
mark to “VF
DISP MODE,” then push the MENU knob.
The
b
mark on the left of VF DISP MODE changes to
a z mark, and the z mark on the left of the setting
changes to a ? mark.
3
Turn the MENU knob until the desired display mode
appears, then push the MENU knob.
The z mark returns to a
b
mark, and the ? mark
returns to a z mark.
Item Description
DISP IRIS Iris opening indicator
DISP ZOOM Zoom position indicator
DISP COLOR
TEMP. Displays the color temperature.
DISP BATT
REMAIN Displays the battery voltage/
remaining capacity of an internal
battery pack or an external battery
connected to the DC IN
connector.
DISP DC IN Displayed when the power is
supplied from an external battery
connected to the DC IN
connector.
DISP WRR RF LVL Displays the reception level of the
wireless microphone.
DISP TIME CODE Displays the time code.
DISP FREEZE Displays the type of freeze-frame
picture.
1)
Setting change confirmation/adjustment progress messages
and display modes
Y: Message is displayed.
N: Message is not displayed.
Message
display
conditions Message Display
mode setting
1 2 3
When the filter
selection has
been changed ND : n, CC : m
(where n = 1, 2, 3, 4,
m = A, B, C, D) N N Y
When the gain
setting has been
changed GAIN : n (where n =
–3 dB, 0 dB, 3 dB, 6 dB,
9 dB,12 dB, 18 dB, 24 dB,
30 dB, 36 dB, 42 dB) N N Y
When the
setting of the
WHITE BAL
switch has been
changed WHITE : n
(where n = A CH, B CH,
PRESET)
or ATW : RUN N N Y
When the
OUTPUT/DCC
switch has been
set to DCC ON
or OFF DCC : ON (or OFF) N Y Y
When the
shutter speed
and mode
setting has been
changed
1)
SS : 1/100 (or 1/125,
1/250, 1/500, 1/1000,
1/2000, ECS, SLS)
2)
N Y Y
When the black
or white balance
has been
adjusted E.g. AWB : OK (For
details, see
“4-1
Adjusting the Black
Balance and the White
Balance” on page 59
.)
N Y Y