Sony HDW-790, Руководство по эксплуатации

Страница: 36 / 176

36
About Cassettes
Chapt
er
3
Re
c
o
rdin
g and Pl
a
y
b
a
c
k
Unloading a cassette
With the power supply on, press the EJECT button to open
the cassette compartment lid. Then take out the cassette. If
you are not going to insert another cassette, close the
cassette lid.
Even if the battery is exhausted and the VTR stops, it is
possible to take out the cassette and close the cassette
compartment lid if the remaining battery voltage is about
10.5 V or more. However, when the battery voltage is low,
do not repeat the unloading operation. If you repeat the
operation, the power may be turned off during the ejection
operation and you may not be able to continue the
operation.
When you do not intend to use the camcorder for a long
time, take out the cassette to protect the tape and turn off
the power.
Unloading a cassette manually (manual eject)
When you cannot unload a cassette even if you press the
EJECT button, take out the cassette manually as illustrated
below.
You need not return the screw to its original position after
taking out the cassette. Although the cassette compartment
lid is not locked, turning on the power makes the cassette
lid operable again.
3-1-2 Preventing Accidental Erasure
The following procedure prevents cassettes from being
recorded inadvertently.
Note
1
Turn the power off.
2
Open this rubber
cover.
3
Pushing on the screw
inside with a
screwdriver, turn the
screw clockwise until
the cassette lid opens.
Cassette
compartment lid
Push the plug in.
To reuse the cassette,
return the plug to its
original position.