Sony HDW-790, Руководство по эксплуатации

Страница: 165 / 176

165
Menu List
Ap
pend
ix
e
s
1) When Y is selected in the camcorder with an optional HKDW-702, the color signal is output from the connector whose selected output signal is an SD signal.
2) When an optional HKDW-702 is installed, the HD SDI OUT connector (located on the side of the camcorder) can be used as the VBS/SDI output connector.
3) When an optional HKDW-702 is installed, this item is displayed.
4) When either 50i or 25PsF is selected, this item is not displayed.
5) 59.94 is the default value for the HDW-790, and 50i is the default value of the HDW-790P.
FILE Menu
The following table lists and describes the items in the
FILE menu.
When the setting range in the Settings column is
surrounded by parentheses ( ), the setup value is a relative value. The setting range shown on the menu screen may
differ from what is shown in the manual.
M19 FORMAT CURRENT (Display only) — Displays the currently selected frame
frequency.
NEXT 59.94/50i/25PsF 59.94/50i
5)
Selects the frame frequency. The selected
frame frequency becomes effective after the
power is turned off and then on again.
M20 VANC RX UMID LINE1 0, 9 to 20 0 Selects the line on which the UMID is to be
recorded (First field). When 0 is selected, the
UMID is not recorded.
UMID LINE2 0, 564 to 593 0 Selects the line on which the UMID is to be
recorded (Second field). When 0 is selected,
the UMID is not recorded.
No. Page Item Settings Default Description
No. Page Item Settings Default Description
F01
USER FILE
1) USER FILE LOAD — EXEC See “6-1 Saving and Loading User Files” on
page 108.
USER FILE SAVE — EXEC
F. ID 16 characters —
USER PRESET — EXEC See “5-4 Resetting USER Menu Settings to the
Standard Settings” on page 106.
F02 USER FILE2 STORE USR PRESET — EXEC Sets the pages registered in the USER menu
to the standard setting.
CLEAR USR PRESET — EXEC Clears the standard setting of pages registered
in the USER menu.
CUSTOMIZE RESET — EXEC Returns pages and items registered in the
USER menu to the factory default state.
LOAD CUSTOM DATA OFF/ON OFF Selects whether to read the USER MENU
CUSTOMIZE settings to be loaded by USER
FILE LOAD.
LOAD OUT OF USER OFF/ON OFF Selects whether to read pages not registered
by USER FILE LOAD.
BEFORE FILE PAGE OFF/ON OFF Selects whether to read data after USER FILE
pages by USER FILE LOAD.
USER LOAD WHITE OFF/ON OFF Selects whether to read white balance data by
USER FILE LOAD.