Sony HDW-790, Руководство по эксплуатации

Страница: 114 / 176

114
Saving and Loading Scene Files
Cha
p
te
r 6
Sa
v
ing an
d Load
ing Us
er Se
tt
ing
Dat
a
When the save is completed, the message
“COMPLETE” appears.
4
To end the menu operation, set the MENU ON/OFF
switch to OFF.
If files have been saved in the page selected in step
2
, those
files are replaced with files loaded from the camcorder
memory. For example, files from 001 to 005 are replaced.
Setting the file ID
Before the data is saved as a scene file, it is useful to set a
file ID to identify it. The set file ID is saved together with
the data.
1
On the SCENE FILE page, turn the MENU knob to
move the
b
mark to F. ID.
2
Push the MENU knob.
A character table appears, allowing you to select
characters you want to enter.
3
Follow steps 4 and 5 in “5-2-8 Setting the Shot ID”
(page 89) to enter the file ID.
Set the file ID before saving the scene file in the
“Memory Stick” or the camcorder memory.
Otherwise, the file ID is not saved with the other data.
4
When you finish entering the file ID, turn the MENU
knob to move the
v
mark to END, then push the
MENU knob.
The SCENE FILE page appears again.
Follow the procedure from step 3 in “6-2-1 Saving a
Scene File” (page 112) .
The set file ID is saved together with the data.
Selecting the display contents
You can select the items of file information to be displayed
on the SCENE STORE pages (P01 to P20) or the SCENE
RECALL pages (P01 to P20) used for saving data to or
loading data from a “Memory Stick.”
For details, see “Selecting the display contents” on page
111.
6-2-2 Loading a Scene File
1
In the TOP menu, select the FILE menu.
2
Turn the MENU knob until the SCENE FILE page
appears, then push the MENU knob to select the page.
Alternatively, on the CONTENTS page select SCENE
FILE, then push the MENU knob to display the
SCENE FILE page.
3
Load a scene file.
To load a scene file stored in the camcorder
Turn the MENU knob to move the
b
mark to the
desired file number, then push the MENU knob.
The
s
which is displayed on the left of the file number
changes to
x
.
The camcorder is set up according to the loaded scene
file.
Note
Note