92
9-4 Items in the Extended Setup Menu
Ch
apt
er 9 Set
up Men
u
s
631
REC START MARK
MODE
Sub-item
1
CRASH REC
OFF:
Do not write recording start marks.
ON:
Write recording start marks during normal recording.
2
ASSEMBLE
OFF:
Do not write recording start marks.
ON:
Write recording start marks during assemble editing.
3
INSERT
OFF:
Do not write recording start marks.
ON:
Write recording start marks during insert editing.
635
LISTING TYPE
SELECT
Sub-item
1
REC START
MARK
OFF:
Do not read recording start marks.
ON:
Read recording start marks.
2
SHOT MARK 1
OFF:
Do not read shot mark 1.
ON:
Read shot mark 1.
3
SHOT MARK 2
OFF:
Do not read shot mark 2.
ON:
Read shot mark 2.
4
POST MARK
OFF:
Do not read post marks.
ON:
Read post marks.
636
MARK SELECT IN
REC/ASSEMBLE
SHOT1:
Write shot mark 1 during recording and assemble editing.
SHOT2:
Write shot mark 2 during recording and assemble editing.
POST:
Write post marks during recording and assemble editing.
Menu items in the range 651 to 699, relating to the UMID
Item number Item name
Settings
651
UMID OUTPUT
Select the UMID type to be output.
off:
Do not output UMID.
BASIC:
Output Basic UMID.
EXTND:
Output Extended UMID.
Note
Even if “EXTND” is selected, Basic UMID is output if Basic UMID is recorded on the
tape being played back.
653
UMID HD VANC
LINE
Specify the HDSDI signal VANC line into which the generated UMID should be inserted.
9, 572
14,577
19,582
10,573
15,578
20,583
11,574
16,579
12,575
17,580
13,576
18,581
Note
The output VANC line during playback follows the setting for recording.
Menu items in the range 600 to 650, relating to the timecode generator (Continued)
Item number Item name
Settings
