Sony HDVF-EL70, Руководство по эксплуатации

Страница: 34 / 54

Attaching to the Camera
34
z
MENU control
Turn the control to select a menu item, and then press the
control to confirm the selection. Use with the MENU
switch to set various functions.
When the menu is not displayed, pressing this control
shows the status information of the viewfinder on the
screen.
For details on operations, see “Using the Menu” on page
42.
Attaching to the Camera
• When attaching the viewfinder to the camera or
removing it from the camera, be sure to lock the
viewfinder in its standard position.
• When removing the viewfinder from the camera, be
sure to secure the tripod with its tilt-lock mechanism
and hold the viewfinder firmly.
Be careful not to fall or drop the viewfinder and camera.
For how to change the position of the viewfinder attached
to the camera, see “Adjusting the Viewfinder Position”
on page 36.
1
Turn the panning base mounting plate of the camera
fully to the right, as illustrated in the figure below.
2
Hold the viewfinder so that the projection of the
panning base located at the bottom is positioned as
illustrated and insert the mounting wedge of the
viewfinder into the V-shaped recess of the camera's
panning base mounting plate.
3
Press the base portion and insert the viewfinder fully
into the panning base mounting plate.
Pull the handle and check to ensure that the
viewfinder is securely locked.
Notes
2
1
Bottom of the
viewfinder
Viewfinder
connector
V-shaped recess
Panning base mounting plate
Mounting
wedge
Panning base
Projection