41
Recording
Chapter
Chapt
er
3
Rec
o
rd
ing and
P
la
y
bac
k
3
Recording and Playback
Recording
This section describes the necessary settings and
operations to perform recording on this unit.
For details of connections and settings when using this
unit as part of an editing system, see Chapter 5,
“Connections and Settings for Editing” (page 55).
For details of use for dubbing through the i.LINK
interface, see Chapter 6, “Using the i.LINK Connector for
Dubbing and TC Insert” (page 64).
For this unit, recording in HDV or DVCAM format is
recommended, but recording in DV (SP mode only) format
is also possible.
• When carrying out multiscene continuous recording on a
DV (SP) tape using this unit with an optional remote
control unit such as the DSRM-10, on rare occasions, the
video may be disrupted at the IN point of the first scene
or the audio may be suppressed due to a REC MODE
(audio recording mode) difference between the tape and
this unit.
There may also be cases in which the unit is subjected to
some functional restrictions attributable to the use of the
DV format.
• Multiscene continuous recording is not possible for
recording in HDV format.
• To record an analog input signal, the option board
HVBK-1505 (option)
is necessary.
For details of the relation between input signals and
recording format, see “Input Signals and Recording
Formats” (page 36).
Settings for Recording
When controlling this unit from an editing control unit
connected to the REMOTE connector or the HDV/
DV connector, see “Remote control switch” (page 19).
1
Power on this unit by pressing on the “ ” side of the
POWER switch.
2
Press the COUNTER SELECT button to select the
type of time data to be used.
Each press of this button cycles through three options:
CNT, TC (timecode), and UB (user bit data). The time
data type indicator for each option lights as it is
selected.
When VITC is selected with the TC SELECT menu
item
, the indication cycles through CNT,
VITC, and VIUB.
When the external editing control unit is used,
selection of the time data type is carried out at the
editing control unit.
Notes
Selected time data
Time data type indicator
Count value of the time
counter
CNT
Timecode TC
(VITC)
User bit data
UB (VIUB)
PRESET
VARIABLE
REC
PB
LEVEL
MONITOR
SELECT
COUNTER
SELECT
PHONES
CONTROL-S
REW
PLAY
F FWD
i.LINK
1
2
VIDEO
3
A
B
CH1 1/2
4
CH2 3/4
OVER
CH
1
0
-12
-20
-30
-40
-60
REC
STOP
TC
VITC
44.1K
OVER
REPEAT
1080 525
CH
2
EDIT MODE
REC INHI
EJECT
LOCAL
i.LINK
HDV DVCAM
(DV)
9PIN
01:23:45:15
INPUT SELECT
REC/PB LEVEL
POWER
DISPLAY
MENU
RESET(NO)
SET(YES)
TC
PRESET
ASSIGN
1
2
3
4
5
Remote control switch
