9
Table of C
on
ten
ts
U
seful R
ec
or
ding
Techniques
Inde
x
GENERAL SET
(Other setup items)
The default settings are marked with
.
DEMO MODE
When your camcorder is connected to a wall outlet (wall socket), a demonstration movie
appear about 10 minutes after you turn on the (Movie) lamp by pressing MODE.
Steps
(HOME)
(SETTINGS)
[GENERAL SET]
[DEMO MODE]
a desired setting
ON
The demonstration appears.
OFF
The demonstration does not appear.
Notes
You can find the demonstration movie on the VISUAL INDEX screen in the default setting. The
demonstration movie will not be restored once it is deleted.
Meanwhile, a movie you have recorded will be registered as the demonstration movie if the movie
satisfies the following conditions.
The movie is protected
The movie is the first one displayed on the VISUAL INDEX screen
The movie is recorded on the internal hard disk
The movie is recorded with high definition image quality (HD)
Tips
When you set this item to [ON] and touch
, the demonstration starts playing.
The demonstration will be suspended:
When you press START/STOP or PHOTO
When you touch the screen during the demonstration (The demonstration starts again after about 10
minutes)
When you turn on the (Photo) lamp
When you press (HOME) or (VIEW IMAGES)
REC LAMP (Recording lamp) (HDR-XR200E/XR200VE)
You can make the camera recording lamp on the front of your camcorder not to turn on.
Steps
(HOME)
(SETTINGS)
[GENERAL SET]
[REC LAMP]
a desired setting
ON
The camera recording lamp lights up.
OFF
The camera recording lamp does not light up.