21
GB
If an HDD Format Error (error code: F20) appears
Perform the following steps to format the unit’s internal hard disk.
1
At first, connect the unit to a computer and backup your data.
Then safely disconnect the drive.
Error code F20 will be shown on the LCD display.
Warning
The following steps will erase all data on your hard disk.
2
Press the CANCEL button 5 times while holding the COPY
button.
The screen below will be displayed.
F30
The internal hard
disk cannot be
detected.
Contact your dealer
or an authorized
service center.
F01
“Memory Stick”
copy error
Reinsert the
“Memory Stick”. If
the error persists, use
a different “Memory
Stick”.
F02
CompactFlash card
copy error
Reinsert the
CompactFlash card.
If the error persists,
use a different
CompactFlash card.
Error
code
Message
Meaning
Corrective action
Содержание HDPS-M10 - Data Storage Wallet
Страница 30: ...8CS 4 按 COPY 按钮选择语言 然后再次按 COPY 按钮确认 选择完成之后 本设备将关闭 5 打开本设备 显示屏开始用新的语言显示菜单和信息 CANCEL 您想要选择的语言 语言更改成功 ...
Страница 50: ...8CT 4 按 COPY 鍵選擇語言 然後再次按 COPY 鍵確認 選擇完成之後 本設備將關閉 5 打開本設備 顯示屏開始用新的語言顯示選單和資訊 CANCEL 您想要選擇的語言 語言更改成功 ...
Страница 87: ...25KR ...
Страница 88: ...Printed in Malaysia ...