34
<VF DISPLAY>
01 (U04)
FOCUS FORM
NORMAL
, ABS (AUTO), ABS
(m), ABS (ft)
Sets the focus display method.
NORMAL
: Displays a value in the range 0 to 255 (no
units).
ABS (AUTO)
: Displays in units of meters or feet,
according to the units setting on the lens.
ABS (m)
: Displays in meters.
ABS (ft)
: Displays in feet.
The NORMAL setting is not available when a Cooke
lens is attached. The default is ABS (AUTO).
<‘!’ IND>
02 (U05)
ND
ON
, OFF
1
, 2, 3 (combination allowed)
[IND]: Turns the ‘!’ display area
on/off.
[NORMAL]: Specifies the conditions under which the ‘!’
indication is not to be displayed even if [IND] is ON.
(By specifying the standard or normal conditions
here, non-standard or abnormal conditions can be
found with the ‘!’ indication on the viewfinder
screen.)
e.g.: With the default setting of ND, the ‘!’ indicator is
displayed when an ND filter other than 1 is selected.
CC
ON
, OFF
A
, B, C (combination allowed)
FAN
ON
, OFF
AUTO1
, AUTO2, MIN, MAX
EXT
ON
, OFF
Y TALLY
ON
, OFF
<VF MARKER>
03 (U06)
MARKER
ON
, OFF
Sets MARKER to ON/OFF.
WHITE
, BLACK, DOT
LEVEL
0 to 100%,
40%
CENTER
ON,
OFF
1
, 2, 3, 4
1
: Full cross hairs
2
: Full cross hairs with a hole
3
: Center
4
: Center with a hole
SAFETY ZONE
ON,
OFF
80.0,
90.0
, 92.5, 95.0%
EFFECT
ON,
OFF
, OFF(ASSIST IND),
OFF(AF DISP)
OFF(ASSIST IND)
: Displayed when INDICATOR of
<FOCUS ASSIST> is ON.
OFF(AF DISP):
Displayed when AF DISPLAY of
<LENS> is ON.
ASPECT
ON,
OFF
16:9, 15:9, 14:9, 13:9,
4:3
, (4.3)
(4.3)
: If VF SCAN is set to 4:3 when HDLA is attached
(cannot be changed)
MASK
ON,
OFF
, (ON)
(ON)
: If VF SCAN is set to 4:3 when HDLA is attached
(cannot be changed)
0 to 15,
12
Sets the darken level outside the aspect area.
SAFETY
ON,
OFF
, (AREA)
Sets the safety marker in Aspect mode.
OFF(AREA)
: Displayed when AREA MARKER of
<FOCUS ASSIST> is ON.
80.0,
90.0
, 92.5, 95.0%
OPERATION
Page name
Page No.
Item
Settings
Description
