Sony HDC3100, Руководство по эксплуатации

Страница: 38 / 56

38
<EXT SWITCH>
16
RET CTRL
CONNECTOR
RET1 Pin5: OFF, RETURN1 SW , RETURN2
SW, RETURN3 SW, ENG, PROD,
EXTENDER, D.EXTENDER,
5600K, VF DETAIL, SPIRIT
LEVEL, FOCUS ASSIST, PinP, VF
ASSIGN SW1, VF ASSIGN SW2,
VTR S/S, TALLY R, TALLY G,
TALLY Y
This function works when each pin of the RET CTRL
connector contacts with GND (Pin3).
TALLY R, G, Y are available only when using the
camera as a standalone device, and make the tally
lamp light. VTR S/S is available only when using the
camera as a standalone device, and makes the R
tally lamp light.
VTR S/S signal is embedded in the video.
RET2 Pin6: OFF, RETURN1 SW, RETURN2
SW , RETURN3 SW, ENG, PROD,
EXTENDER, D.EXTENDER,
5600K, VF DETAIL, SPIRIT
LEVEL, FOCUS ASSIST, PinP, VF
ASSIGN SW1, VF ASSIGN SW2,
VTR S/S, TALLY R, TALLY G,
TALLY Y
RET3 Pin4: OFF, RETURN1 SW, RETURN2
SW,
RETURN3 SW , ENG, PROD,
EXTENDER, D.EXTENDER,
5600K, VF DETAIL, SPIRIT
LEVEL, FOCUS ASSIST, PinP, VF
ASSIGN SW1, VF ASSIGN SW2,
VTR S/S, TALLY R, TALLY G,
TALLY Y
INCOM1 Pin1: OFF, RETURN1 SW, RETURN2
SW, RETURN3 SW,
ENG , PROD,
EXTENDER, D.EXTENDER,
5600K, VF DETAIL, SPIRIT
LEVEL, FOCUS ASSIST, PinP, VF
ASSIGN SW1, VF ASSIGN SW2,
VTR S/S, TALLY R, TALLY G,
TALLY Y
INCOM2 Pin2: OFF, RETURN1 SW, RETURN2
SW, RETURN3 SW, ENG,
PROD ,
EXTENDER, D.EXTENDER,
5600K, VF DETAIL, SPIRIT
LEVEL, FOCUS ASSIST, PinP, VF
ASSIGN SW1, VF ASSIGN SW2,
VTR S/S, TALLY R, TALLY G,
TALLY Y
<RETURN>
17
RET1 SW SEL CCU RET1, CCU RET2,
CCU RET3, CCU RET4 Varies based on the RET1 button setting.
RET2 SW SEL Varies based on the RET2 button setting.
RET3 SW SEL CCU RET1, CCU RET2,
CCU RET3 , CCU RET4
RET1 SW + RET2 SW RET1 SW , RET3 SW Changes operation when you press both the RET1
button and RET2 button at the same time.
RET1 SW : The two buttons function as the RET1
button.
RET3 SW : The two buttons function as the RET3
button.
<HEADSET MIC>
18 (U11)
INTERCOM DYNAMIC
, CARBON, MANUAL
LEVEL –60 dBu, –50 dBu, –40 dBu,
–30 dBu,–20 dBu, (
–60 dBu ),
(–50 dBu), (–40 dBu), (–30 dBu),
(–20 dBu)
Settings in ( ): With DYNAMIC or CARBON (cannot
be changed)
–6, 0 , 6 dBu Input gain
POWER ON, OFF, (ON), ( OFF ) Settings in ( ): With DYNAMIC or CARBON (cannot
be changed)
UNBAL ON , OFF, (ON), (OFF) Settings in ( ): With CARBON (cannot be changed)
EARPHONE ON, OFF
LEVEL –34 dBu, –40 dBu , –46 dBu
OPERATION
Page title
Page No. Item Settings Description