55
Locations and Functions of Parts
VDA-C Board
a
VBS (composite video signal output) connector
(BNC-type)
The signal from the video camera may be output as an
analog composite signal.
b
R/R-Y, G/Y, B/B-Y (component video signal
output) connectors (BNC-type)
The signal from the video camera may be output as a R/R-
Y, G/Y, B/B-Y component signal or an RGB component
signal.
HKCU1005 SDI Output Expansion
Unit (optional)
To reduce the risk of electric shock, fire or injury, do not
open the cabinet. To adjust the internal settings, refer to
qualified service personnel.
The HKCU1005 consists of a DRX front board and a HIF
rear boards.
When these boards are installed in the front and rear
expansion slots of the unit, four SDI output connectors are
added to the unit.
These boards can be installed in the expansion slots of the
HKCU1000/HKCU1500 (up to two per unit).
The format of the SDI signal output through the HIF board
can be set by the two up-and-down connectors.
For details on installation, contact a Sony service or sales
representative.
DRX Board
a
Output signal format indicators
Displays the format status of the output signal.
1080/720P/SD:
One of these indicators corresponding to
the signal status of the SDI OUTPUT 1/2 connectors
of the four SDI signal output from this unit lights.
PsF:
Lights when the video camera is operating in
Progressive mode.
FC:
Lights when the frame rate converter function of the
unit is performed.
60/50/30/25/24:
One of these indicators corresponding to
the field/frame frequency of the output signals lights.
HIF Board
a
SDI OUT1, SDI OUT2, SDI OUT3, SDI OUT4
(HD/SD serial digital interface output 1-4)
connectors (BNC-type)
The signal from the video camera may be output as four
HD-SDI or SD-SDI signals.
Note
VBS
R/R-Y
G/Y
B/B-Y
VDA-C
1
VBS connector
2
R/R-Y, G/Y, B/B-Y connectors
DRX
1080
720P
SD
PsF
FC
60
50
30
25
24
1
Output signal format indicators
1
3
2
4
SDI OUT
1
SDI OUT1, SDI OUT2, SDI OUT3, SDI OUT4
connectors
