background image

model name [SHAKE-99/SHAKE-77/SHAKE-55/SHAKE-33]

[4-487-569-

14

(1)] GB

29

GB

filename[D:\NORM'S JOB\SONY HA\SO140043\SHAKE-99_77_55_33 (PMRF 
04)\4487569141_GB\06BAS.fm]

masterpage:Right

Sou

nd Adju

stment

Adjusting the sound

Selecting the Virtual 
Football mode

You can experience a feeling of presence 
in the stadium when watching the football 
match broadcast.

Press FOOTBALL repeatedly while 
watching a football match 
broadcast.

• NARRATION ON: You can enjoy an 

immersive feeling of being in a football 
stadium through enhanced stadium 
cheers.

• NARRATION OFF: You can enjoy a 

more immersive feeling of being in a 
football stadium by minimizing the 
volume level of narration in addition to 
the enhancement of cheers.

To cancel the Virtual Football mode

Press MUSIC repeatedly to select 
“FLAT”.

Notes

• We recommend you to select the football 

mode when watching a football match 
broadcast.

• If you hear unnatural sound in the content 

when “NARRATION OFF” is selected, 
“NARRATION ON” is recommended.

• This feature does not support monaural sound.
• You can only select the Virtual Football mode 

during AUDIO IN 1 or AUDIO IN 2 function.

Sound Adjustment

To

Do this

Reinforce the 
bass and create 
a more powerful 
sound

Press BASS BAZUCA on 
the unit.

Reduce the bass 
sound (BASS 
CUT)

Hold down BASS 
BAZUCA on the unit for 
2 seconds or more.
To cancel the BASS CUT 
effect, press BASS 
BAZUCA again.

Notes

• When BASS CUT effect 

is turned on, BASS 
BAZUCA indicator 
flashes and “BASS CUT” 
appears in the display 
panel every 10 seconds.

• The BASS CUT effect is 

turned off automatically 
when you turn off the 
system.

Select a preset 
sound effect

Press MUSIC or MOVIE/
GAME. 
To cancel preset sound 
effect, press MUSIC  
repeatedly to select 
“FLAT”.

Содержание HCD-SHAKE33

















































Отзывы: