![background image](http://html.mh-extra.com/html/sony/hcd-shake33/hcd-shake33_service-manual_420879001.webp)
SERVICE MANUAL
Sony Corporation
Published by Sony EMCS (Malaysia) PG Tec
HCD-SHAKE33/SHAKE77
HOME AUDIO SYSTEM
9-890-648-01
2014A80-1
©
2014.01
US Model
AEP Model
UK Model
HCD-SHAKE33
E Model
HCD-SHAKE33/SHAKE77
Australian Model
HCD-SHAKE77
Ver. 1.0 2014.01
• HCD-SHAKE33 is the tuner, USB, CD
player, Bluetooth, NFC and amplifi er
section in SHAKE-33.
• HCD-SHAKE77 is the tuner, USB, CD
player, Bluetooth, NFC and amplifi er
section in SHAKE-77.
SPECIFICATIONS
CD Section
Model Name Using Similar Mechanism
NEW
CD Mechanism Type
CDM90-DVBU202//M
Optical Pick-up Name
CMS-S76RFS7G
Photo: HCD-SHAKE77
–
Continued on next page
–
r, USB, CD
d amplifier
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
(US model only)
SHAKE-33
With 4 ohm loads, both channels driven, from
40 – 600 Hz; rated 180 watts per channel
minimum RMS power, with no more than
0.7% total harmonic distortion from 250
milliwatts to rated output.
Amplifi er section
The following are measured at
US model:
AC 120 V, 60 Hz
MX model:
AC 120 V – 240 V, 60 Hz
AEP, UK model:
AC 220 V – 240 V, 50/60 Hz
E51 model:
AC 220 V – 240 V, 50 Hz
Other models:
AC 120 V – 240 V, 50/60 Hz
SHAKE-77
WF (Woofers)/MID (Mid speakers)/
TW (Tweeters)
Power Output (rated):
350 W + 350 W (at 4 ohms, 1 kHz,
1%
THD)
RMS output power (reference):
600 W + 600 W (per channel at
4 ohms, 1 kHz)
SW (Subwoofers)
RMS output power (reference):
1,200 W + 1,200 W (per channel at
8 ohms, 100 Hz)
SHAKE-33
WOOFERS
Power Output (rated):
350 W + 350 W (at 4 ohms, 100 Hz,
1%
THD)
RMS output power (reference):
600 W + 600 W (per channel at
4 ohms, 100 Hz)
MID (Mid speakers)/TWEETERS
RMS output power (reference):
500 W + 500 W (per channel at
5 ohms, 1 kHz)
Inputs
AUDIO IN 1/PARTY CHAIN IN L/R
Voltage 2 V, impedance 47 kilohms
AUDIO IN 2 L/R
Voltage 2 V, impedance 47 kilohms
MIC (SHAKE-77 only)
Sensitivity 1 mV, impedance 10 kilohms
(USB) A,
(USB) B port
Type
A
Outputs
AUDIO OUT/PARTY CHAIN OUT L/R
Voltage 2 V, impedance 1 kilohm
USB section
Supported bit rate
WMA:
48 kbps – 192 kbps, VBR, CBR
AAC:
48 kbps – 320 kbps, VBR, CBR
Sampling frequencies
WMA: 44.1 kHz
AAC: 44.1 kHz
Supported USB device
Mass Storage Class
Maximum current
500
mA
Disc/USB section
Supported bit rate
MPEG1
Layer-3:
32 kbps – 320 kbps, VBR
MPEG2 Layer-3:
8 kbps – 160 kbps, VBR
MPEG1
Layer-2:
32 kbps – 384 kbps, VBR
Sampling frequencies
MPEG1
Layer-3:
32 kHz/44.1 kHz/48 kHz
MPEG2
Layer-3:
16 kHz/22.05 kHz/24 kHz
MPEG1
Layer-2:
32 kHz/44.1 kHz/48 kHz
Disc player section
System
Compact disc and digital audio system
Laser Diode Properties
Emission Duration: Continuous
Laser Output*: Less than 44.6 µW
* This output is the value
measurement at a distance of
200 mm from the objective lens
surface on the Optical Pick-up
Block with 7 mm aperture.
Frequency response
20 Hz – 20 kHz
Signal-to-noise ratio
More than 90 dB
Dynamic range
More than 88 dB
Tuner section
FM stereo, FM/AM superheterodyne tuner
Antenna:
FM lead antenna
AM loop antenna
FM tuner section
Tuning range
US
model:
87.5 MHz – 108.0 MHz (100 kHz step)
Other
models:
87.5 MHz – 108.0 MHz (50 kHz step)
AM tuner section
Tuning range
AEP, UK model:
531 kHz – 1,602 kHz (9 kHz step)
AUS, E2, E51, US, MX models:
531 kHz – 1,710 kHz (9 kHz step)
530 kHz – 1,710 kHz (10 kHz step)
Other
models:
531 kHz – 1,602 kHz (9 kHz step)
530 kHz – 1,610 kHz (10 kHz step)
Bluetooth
section
Communication system
Bluetooth
Standard version 3.1
Output
Bluetooth
Standard Power Class 2
Maximum communication range
Line of sight approx. 10m
1)
Frequency band
2.4 GHz band (2.4000 GHz –
2.4835
GHz)
Modulation method
FHSS (Freq Hopping Spread
Spectrum)
Compatible
Bluetooth
profiles
2)
A2DP (Advanced Audio Distribution
Profile)
AVRCP 1.3 (Audio Video Remote
Control Profile)
SPP (Serial Port Profile)
Supported codecs
SBC (Sub Band Codec)
AAC (Advanced Audio Coding)
1)
The actual range will vary depending on
factors such as obstacles between devices,
magnetic fields around a microwave oven,
static electricity, reception sensitivity,
antenna’s performance, operating system,
software application, etc.
2)
Bluetooth
standard profiles indicate the
purpose of
Bluetooth
communication
between devices.
Содержание HCD-SHAKE33
Страница 119: ...MEMO HCD SHAKE33 SHAKE77 119 ...