HCD-GTX777/GTX787/GTX888
78
• IC Pin Function Descriptions
IC901 TMP92CD28AFG-6VD8 (USB CONTROLLER) (USB BOARD)
Pin No.
Pin Name
I/O
Pin Description
1
RESET
I
Reset signal input from the system controller “L”: reset
2
PC0/INT0
I
Ready to send signal input from the system controller
3
PC1/INT1
O
Not used in this set. Connected to ground.
4
PC2/INT2/TB1IN0
O
Not used in this set. Connected to ground.
5
PC3/INT3
I
Function selection signal input Fixed at “L” in this set.
6
DVCC3B
—
Power supply pin (+3.3 V)
7
PC6/XT1
O
Not used in this set. (Open)
8
PC7/XT2
O
Not used in this set. (Open)
9
PWE
O
Not used in this set. (Open)
10
DVSS1B
—
Ground pin
11
DVCC1B
—
Power supply pin (+3.3 V)
12
RVOUT1
O
Reference voltage (+3.3 V) output pin
13, 14
RVIN
I
Reference voltage (+3.3 V) input pin
15
RVOUT2
O
Reference voltage (+3.3 V) output pin
16
DVCC1A
—
Power supply pin (+3.3 V)
17
DVSS1A
—
Ground pin
18 to 25
P00/D0 to P07/D7
I/O
Two-way data bus with the S-RAM
26
DVSS
—
Ground pin
27
DVCC3A
—
Power supply pin (+3.3 V)
28 to 35
P10/D8 to P17/D15
I/O
Two-way data bus with the S-RAM
36
P40/A0
O
Address signal output pin Not used in this set. (Open)
37 to 43
P41/A1 to P47/A7
O
Address signal output to the S-RAM
44
DVSS
—
Ground pin
45
DVCC3A
—
Power supply pin (+3.3 V)
46 to 54
P50/A8 to P60/A16
O
Address signal output to the S-RAM
55 to 58
P61/A17 to P64/A20
O
Serial data output to the CD-MP3 processor
59
P65/A21
O
Serial data transfer clock signal output to the CD-MP3 processor
60
P66/A22
O
Chip enable signal output to the CD-MP3 processor
61
P67/A23
O
Not used in this set. (Open)
62
DVSS
—
Ground pin
63
DVCC3A
—
Power supply pin (+3.3 V)
64
P70/RD
O
Output enable signal output to the S-RAM
65
P71/SRWR
O
Write enable signal output to the S-RAM
66
P72/SRLLB
O
Lower-byte control signal output to the S-RAM
67
P73/SRLUB
O
Upper-byte control signal output to the S-RAM
68
P74/TA0IN
O
Not used in this set. (Open)
69
P80/CS0/TA1OUT (BOOT)
I
Boot mode selection signal input “L”: boot mode
70
P82/CS2
I
Chip select signal output to the S-RAM
71
P83/CS3/WAIT/TA5OUT
O
L/R sampling clock signal output to the CD-MP3 processor
72
AM1
I
Function mode selection signal input Fixed at “H” in this set.
73
X2
O
System clock output (9 MHz)
74
DVSS
—
Ground pin
75
X1
I
System clock input (9 MHz)
76
DVCC3A
—
Power supply pin (+3.3 V)
77
P75/USBOC
I
Over current detection signal input
78
P76/USBPON
O
USB VBUS power on/off control signal output “H”: power on
79
D+
I/O
Two-way data (positive) bus with the USB connector
80
D–
I/O
Two-way data (negative) bus with the USB connector
81
AM0
I
Function mode selection signal input Fixed at “H” in this set.
82
P77/X1USB
O
Not used in this set. (Open)
83
DVSS
—
Ground pin
84
PF0/TXD0
O
Clear to send signal output to the system controller
85
PF1/RXD0
O
Serial data signal output
Содержание HCD-GTX777
Страница 107: ...MEMO 107 HCD GTX888 GTX777 GTX787 ...