18
HCD-GPZ6/GPZ7
[CD ERROR CODE DISPLAY MODE]
This mode can be used for error code display of CD section.
Procedure:
1. Press the
I
/
1
button to turn the power on.
2. Press the
[FUNCTION]
key to select “CD”.
3. Press three keys of
[DISPLAY]
,
[DSGX]
and
M
L
simultaneously.
4. When this mode is activated, mechanism deck error code is
displayed on the fluorescent indicator tube.
5. Press the
+
–
keys to changed over between optical
pick-up error code display mode and mechanism deck error
code mode.
6. Turn the
l
m M
L
keys to change over display of error
history.
[CD SERVO TEST MODE]
•
This mode used to check operation of optical pick-up.
Procedure:
1. Press the
I/
1
key to turn the power ON.
2. Press the
[FUNCTION]
key to select “CD”.
3. Press three keys of
[DISPLAY]
,
[ENTER]
and
l
m
simultaneously.
4. When the CD servo test mode is activated. In this state, each
time
[PLAY MODE]
key is pressed, tracking ON/OFF switch
is performed.
[CD POWER MANAGE]
This mode is for switch the CD power supply on/off. Even if this
state pulls out AC plug, it is held.
Procedure:
1. Press the
I/
1
button to turn the power on.
2. Press the
[FUNCTION]
key to select “CD”.
3. Press the
I/
1
button again to turn the power off (standby).
4. While pressing the
x
(CD) button, press the
I/
1
button.
5. It turns power on and display “CD POWER”, then display
“ON” or “OFF”.
[CHANGE-OVER THE AM TUNING INTERVAL]
(EXCEPT AEP, UK, East European and Russian models)
The AM tuning interval can be changed over 9 kHz or 10 kHz.
Procedure:
1. Press the
I/
1
button to turn the power on.
2. Press the
[TUNER/BAND]
button to select TUNER (AM)
function.
button again to turn the power off (standby).
I/
1
button.
5. It turns power on and display “STEP 9kHz” or “STEP 10kHz”,
and thus the tuning interval is changed over.
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299
