Sony HCD-CX4iP, Руководство по обслуживанию

Страница: 1 / 56

SERVICE MANUAL
Sony Corporation
Published by Sony Techno Create Corporation
HCD-CX4iP/CX5iP
SPECIFICATIONS
COMPACT DISC RECEIVER
9-893-182-01
2011D05-1
© 2011.04
US Model
Canadian Model
HCD-CX4iP
AEP Model
E Model
Australian Model
Chinese Model
HCD-CX5iP
Ver. 1.0 2011.04
Model Name Using Similar Mechanism NEW
CD Mechanism Type CDM80BTK-F4BD94D-V
Base Unit Name BU-F4BD94D-V
Optical Pick-up Block Name KSM-215CFP
• HCD-CX4iP is the Amplifi er, CD player, Tuner
and iPod/iPhone section in CMT-CX4iP.
• HCD-CX5iP is the Amplifi er, CD player, Tuner,
iPod/iPhone and USB section in CMT-CX5iP/
WHG-CX5iP.
Photo: HCD-CX5iP
Amplifier section
European, Russian, and Israel models:
DIN power output (rated): 15 watts + 15 watts (8 ohms at 1 kHz, DIN)
Continuous RMS power output (reference): 20 watts + 20 watts (8 ohms at
1 kHz, 10% THD)
Music power output (reference): 20 watts + 20 watts (8 ohms at 1 kHz, 10%
THD)
Other models:
DIN power output (rated): 15 watts + 15 watts (8 ohms at 1 kHz, DIN)
Continuous RMS power output (reference): 20 watts + 20 watts (8 ohms at
1 kHz, 10% THD)
Input
AUDIO IN (stereo mini jack): Sensitivity 700 mV, impedance 47 kilohms
Outputs
SPEAKERS: Accepts impedance of 8 ohms
CD player section
System: Compact disc and digital audio system
Laser Diode Properties
Emission Duration: Continuous
Laser Output*: Less than 44.6μW
* This output is the value measurement at a distance of 200mm from the
objective lens surface on the Optical Pick-up Block with 7mm aperture.
Frequency response: 20 Hz 20 kHz
Signal-to-noise ratio: More than 90 dB
Dynamic range: More than 90 dB
Tuner section
FM stereo, FM superheterodyne tuner
Tuning range:
iPod/iPhone section
Compatible iPod/iPhone models:
iPod touch 4th generation
iPod touch 3rd generation
iPod touch 2nd generation
iPod touch 1st generation
iPod nano 6th generation
iPod nano 5th generation (video camera)
iPod nano 4th generation (video)
iPod nano 3rd generation (video)
iPod nano 2nd generation (aluminum)
iPod classic
iPhone 4
iPhone 3GS
iPhone 3G
iPhone
“Made for iPod,” and “Made for iPhone” mean that an electronic accessory has
been designed to connect specifically to iPod or iPhone, respectively, and has
been certified by the developer to meet Apple performance standards. Apple
is not responsible for the operation of this device or its compliance with safety
and regulatory standards. Please note that the use of this accessory with iPod
or iPhone may affect wireless performance.
USB section (CX5iP only)
Supported bit rate:
MP3 (MPEG 1 Audio Layer-3): 32 kbps 320 kbps, VBR
WMA: 48 kbps 192 kbps, VBR
AAC: 48 kbps 320 kbps
Sampling frequencies:
MP3 (MPEG 1 Audio Layer-3): 32/44.1/48 kHz
WMA: 44.1 kHz
AAC: 44.1 kHz
(USB) port: Type A, maximum current 500 mA
General (CX5iP)
Power requirements:
AC adapter
Input: 100 V 240 V AC, 50/60 Hz
Output: DC 19.5 V 3.9A
Power consumption: 28 watts
Dimensions (W/H/D) (excl. speakers):
Approx. 250 mm × 245 mm × 130 mm
Mass (excl. speakers): Approx. 2.2 kg
Quantity of the main unit: 1 piece
Design and specifications are subject to change without notice.
Standby power consumption: 0.5 W
AU
US and Canadian models:
DIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC DISTORTION:
(The United States model only)
With 8 ohm loads, both channels driven, from 120 - 15,000 Hz; rated 20 watts
per channel minimum RMS power, with no more than 10% total harmonic
distortion from 250 milliwatts to rated output.
DIN power output (rated): 15 watts + 15 watts (8 ohms at 1 kHz, DIN)
Continuous RMS power output (reference): 20 watts + 20 watts (8 ohms at
1 kHz, 10% THD)
Music power output (reference): 20 watts + 20 watts (8 ohms at 1 kHz, 10%
THD)
General (CX4iP)
Power requirements:
AC adapter
Input: 100 V 240 V AC, 50/60 Hz
Output: DC 19.5 V 3.9A
Power consumption: 24 watts
Dimensions (W/H/D) (excl. speakers):
Appro
Mass (excl. speakers): Approx. 2.2 kg (4 lb 14 oz)
Quantity of the main unit: 1 piece
Power output (rated): 15 watts + 15 watts (8 ohms at 1 kHz, 1
120 V AC area in E, Mexican and Argentina models:
% THD)
RMS power output (reference): 25 watts + 25 watts (8 ohms at 1 kHz)
US, Canadian and Brazilian models:
87.5 MHz 108.0 MHz (100 kHz step)
Except US, Canadian and Brazilian models:
87.5 MHz 108.0 MHz (50 kHz step)
Antenna: FM lead antenna