manualshive.com logo in svg

Sony HAR-D1000 - Hard Disc Audio Recorder, Руководство по обслуживанию

Поделиться
Скачать
Sony HAR-D1000 - Hard Disc Audio Recorder Скачать руководство пользователя страница 18

18

HAR-D1000

Ver 1.1  2001.12

3. READ TEST

* This mode needs not be performed in normal operation.
* Perform this mode only for the newly formatted HD.
Procedure:
(1) Enter the HD test mode, then rotate the 

[ALBUM]

 dial to display “Read Test?”, and press the 

[ALBUM]

 dial to display “IN”.  “MID”,

“OUT” or “THRU” is also selectable by rotating the 

[ALBUM]

 dial.

(2) Press the 

[ALBUM]

 dial and “Testing  xx %” is displayed during the read test.

(3) When the read test is good, “OK” will be displayed.
(4) To exit from this mode, press the 

[CLEAR]

 button.

* “THRU” test takes very long time.

4. WRITE TEST

* This mode needs not be performed in normal operation.
* Perform this mode only for the newly formatted HD.
Procedure:
(1) Enter the HD test mode, then rotate the 

[ALBUM]

 dial to display “Write Test?”, and press the 

[ALBUM]

 dial to display “IN”.  “MID”,

“OUT” or “THRU” is also selectable by rotating the 

[ALBUM]

 dial.

(2) Press the 

[ALBUM]

 dial and “Testing  xx %” is displayed during the write test.

(3) When the write test is good, “OK” will be displayed.
(4) To exit from this mode, press the 

[CLEAR]

 button.

* “THRU” test takes very long time.

5. R/W TEST

* Perform the R/W TEST when checking the formatted HD.
* Confirmation is normally satisfied by each performing IN, MID and OUT sector test.
Procedure:
(1) Enter the HD test mode, then rotate the 

[ALBUM]

 dial to display “R/W Test?”, and press the 

[ALBUM]

 dial to display “IN”. “MID”,

“OUT” or “THRU” is also selectable by rotating the 

[ALBUM]

 dial.

(2) Press the 

[ALBUM]

 dial and “Testing  xx %” is displayed during the R/W test.

(3) When the R/W test is good, “OK” will be displayed.
(4) To exit from this mode, press the 

[CLEAR]

 button.

* “THRU” test takes very long time.

6. SMART TEST

* This mode displayed status of S.M.A.R.T. functions of the HD.
* If "NG" appears in this mode, the HD may be damaged in the near future. Replacement of the HD is recommended.
Procedure:
(1) Enter the HD test mode, then rotate the 

[ALBUM]

 dial to display “Smart?”, and press the 

[ALBUM]

 dial.

(2) When the test is complete, “OK” or “NG” is displayed.
(3) To exit from this mode, press the 

[CLEAR]

 button.

HD Aging Test

* This mode needs not be performed in normal operation.
* Perform this mode only for the newly formatted HD.
Procedure:
1.

Enter the test mode, then turn the 

[ALBUM]

 dial to display “< HD Aging > 6”, and press the 

[ALBUM]

 dial.

2.

Tracks of 4 seconds are created automatically.

3.

To exit this mode, press the  

x

  (HDD) button.

4.

Execute “<Initial> 8” (All reset) of the test mode.

Содержание HAR-D1000 - Hard Disc Audio Recorder





































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды